{"title":"Electronics","description":"\u003cp\u003eAdvanced electronic diagnostics, module repair, wiring restoration, sensor calibration, and programming for modern and high-performance vehicles.\u003c\/p\u003e","products":[{"product_id":"03-05-lamborghini-gallardo-e-gear-software-upgrade-to-lbd26mba","title":"Lamborghini Gallardo 2003–2005 E-Gear TCU Software Upgrade to LBD26MBA","description":"\u003cp data-start=\"257\" data-end=\"620\"\u003eUpgrade your early Lamborghini Gallardo E-Gear transmission with the \u003cstrong data-start=\"345\" data-end=\"370\"\u003eLBD26MBA TCU software\u003c\/strong\u003e, designed for models from \u003cstrong data-start=\"397\" data-end=\"413\"\u003e2003 to 2005\u003c\/strong\u003e. If your Gallardo is still running older software versions such as \u003cstrong data-start=\"481\" data-end=\"493\"\u003eLBD08UNR\u003c\/strong\u003e or \u003cstrong data-start=\"497\" data-end=\"509\"\u003eLBD19UU1\u003c\/strong\u003e, this factory-recommended update dramatically improves \u003cstrong data-start=\"565\" data-end=\"617\"\u003eshift quality, response, and overall drivability\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"622\" data-end=\"669\"\u003eWith the LBD26MBA upgrade, you’ll experience:\u003c\/p\u003e\n\u003cp data-start=\"673\" data-end=\"799\"\u003e\u003cstrong data-start=\"673\" data-end=\"695\"\u003eSmoother Shifting:\u003c\/strong\u003e Refined gear transitions, particularly in automatic mode, for a more comfortable and controlled ride.\u003c\/p\u003e\n\u003cp data-start=\"802\" data-end=\"938\"\u003e\u003cstrong data-start=\"802\" data-end=\"822\"\u003eFaster Response:\u003c\/strong\u003e Optimized shift timing and better adaptation to throttle input, enhancing both performance and daily drivability.\u003c\/p\u003e\n\u003cp data-start=\"941\" data-end=\"1093\"\u003e\u003cstrong data-start=\"941\" data-end=\"964\"\u003eEnhanced Algorithm:\u003c\/strong\u003e Improved clutch control logic and gear engagement under load, giving your Lamborghini sharper and more consistent performance.\u003c\/p\u003e\n\u003cp data-start=\"1095\" data-end=\"1395\"\u003eThis essential upgrade ensures your early Gallardo E-Gear delivers the performance it was designed for. Whether you’re looking to modernize your transmission, improve everyday driving, or enhance track performance, the \u003cstrong data-start=\"1314\" data-end=\"1347\"\u003eLBD26MBA TCU software upgrade\u003c\/strong\u003e is a must-have for all early Gallardo models.\u003c\/p\u003e\n\u003cp data-start=\"1397\" data-end=\"1673\"\u003e\u003cstrong data-start=\"1397\" data-end=\"1428\"\u003eWhy Choose GTE Engineering:\u003c\/strong\u003e\u003cbr data-start=\"1428\" data-end=\"1431\"\u003eAt GTE Engineering, we specialize in high-performance Lamborghini and Ferrari electronics and driveline solutions. Our team ensures proper installation, testing, and calibration so your vehicle achieves \u003cstrong data-start=\"1634\" data-end=\"1670\"\u003epeak performance and reliability\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c!----\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":41538237431889,"sku":"50164300141415","price":1880.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/rs_w_600_h_600.webp?v=1758908087"},{"product_id":"mclaren-wiper-motor-part-11a7848cp","title":"McLaren Wiper Motor 11A7848CP – OEM Replacement for McLaren MP4-12C, 650S – Genuine Quality Part","description":"\u003ch3 data-start=\"164\" data-end=\"209\"\u003e\u003cstrong data-start=\"168\" data-end=\"209\"\u003eMcLaren Wiper Motor – Part #11A7848CP\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"211\" data-end=\"515\"\u003eKeep your McLaren’s performance and visibility at their best with this \u003cstrong data-start=\"282\" data-end=\"325\"\u003epremium OEM-spec windshield wiper motor\u003c\/strong\u003e, part \u003cstrong data-start=\"332\" data-end=\"346\"\u003e#11A7848CP\u003c\/strong\u003e. Engineered for precision, reliability, and durability, this motor ensures \u003cstrong data-start=\"422\" data-end=\"472\"\u003esmooth, quiet, and powerful wiping performance\u003c\/strong\u003e even under demanding weather conditions.\u003c\/p\u003e\n\u003cp data-start=\"517\" data-end=\"861\"\u003ePerfect fitment for \u003cstrong data-start=\"537\" data-end=\"562\"\u003eMcLaren MP4-12C, 650S\u003c\/strong\u003e, and related models, this direct replacement motor installs easily using your factory connectors and mounting points, no modifications needed. Whether you’re restoring your supercar or maintaining peak performance, this wiper motor delivers \u003cstrong data-start=\"805\" data-end=\"858\"\u003efactory-level function, safety, and peace of mind\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"863\" data-end=\"878\"\u003e\u003cstrong data-start=\"863\" data-end=\"876\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"881\" data-end=\"926\"\u003eDirect-fit OEM replacement, part #11A7848CP\u003c\/li\u003e\n\u003cli data-start=\"929\" data-end=\"988\"\u003eDesigned for McLaren MP4-12C, 650S, and compatible models\u003c\/li\u003e\n\u003cli data-start=\"991\" data-end=\"1050\"\u003eSmooth and quiet operation with strong, consistent torque\u003c\/li\u003e\n\u003cli data-start=\"1053\" data-end=\"1111\"\u003eFactory connectors for simple plug-and-play installation\u003c\/li\u003e\n\u003cli data-start=\"1114\" data-end=\"1166\"\u003eRestores the correct wipe pattern and parking position\u003c\/li\u003e\n\u003cli data-start=\"1169\" data-end=\"1221\"\u003eBuilt for long-lasting performance and reliability\u003cstrong data-start=\"1223\" data-end=\"1237\"\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong data-start=\"1223\" data-end=\"1237\"\u003eCondition:\u003c\/strong\u003e\u003cbr data-start=\"1237\" data-end=\"1240\"\u003eBrand new, high-quality construction, tested for performance and fit.\u003c\/p\u003e\n\u003cp data-start=\"1313\" data-end=\"1439\"\u003eUpgrade your McLaren with confidence, experience the precision and reliability only genuine-quality components can deliver.\u003c\/p\u003e\n\u003cp data-start=\"1313\" data-end=\"1439\"\u003e\u003ca href=\"https:\/\/gteeng.com\/\"\u003ewww.gteeng.com\u003c\/a\u003e\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":42549102051409,"sku":"51388639514175","price":460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/thumb.jpg?v=1758907986"},{"product_id":"front-suspension-lift-relay-module-for-ferrari-458-f12-ff","title":"Front Suspension Lift Relay Module for Ferrari 458 F12 FF","description":"\u003ch2 data-end=\"804\" data-start=\"193\"\u003e\u003cstrong\u003eFront Suspension Lift Relay Module for Ferrari 458 F12 FF\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-end=\"804\" data-start=\"193\"\u003eHigh-quality relay module controls the hydraulic pump of the front suspension lift system for Ferrari 458 F12 and FF models Designed to meet OEM electrical specifications it provides reliable activation with corrosion-resistant terminals and secure mounting Precision construction reduces failure risk and supports ride-height adjustments under varied driving conditions Fits Ferrari 458 Italia 458 Spider F12berlinetta F12 TDF and FF using reference number 251997 New bench-tested unit ready for direct installation with standard automotive connectors Items marked SO indicate special order from our supplier\u003c\/p\u003e\n\u003cp data-end=\"1241\" data-start=\"806\"\u003eCompatible Vehicles Ferrari 458 Italia 458 Spider F12berlinetta F12 TDF FF\u003cbr data-end=\"883\" data-start=\"880\"\u003eCondition: New OEM specification\u003cbr data-end=\"917\" data-start=\"914\"\u003eReference Numbers Ferrari 251997\u003cbr data-end=\"952\" data-start=\"949\"\u003eFunction: Activates the hydraulic pump for the front suspension lift\u003cbr data-end=\"1014\" data-start=\"1011\"\u003eVoltage 12 V DC\u003cbr data-end=\"1032\" data-start=\"1029\"\u003eMaximum Current 30 A\u003cbr data-is-only-node=\"\" data-end=\"1055\" data-start=\"1052\"\u003eMaterial ABS housing with plated metal terminals\u003cbr data-end=\"1106\" data-start=\"1103\"\u003eMounting Type Panel or bracket mount with standard automotive connector\u003cbr data-end=\"1180\" data-start=\"1177\"\u003eDimensions 3.5 x 2.5 x 1.5 inches L x W x H\u003cbr data-end=\"1226\" data-start=\"1223\"\u003eWeight 0.4 lb\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"www.gteeng.com\"\u003ewww.gteeng.com\u003c\/a\u003e\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":58268510060625,"sku":"62342078947495","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/Front-Suspension-Lift-Relay-Module-for-Ferrari-458-F12-FF.jpg?v=1760560057"},{"product_id":"ferrari-maserati-full-line-led-3rd-brake-light-high-brightness-rear-center-stop-lamp-upgrade-pn-ilual3bl","title":"Ferrari, Maserati Full Line LED 3rd Brake Light","description":"\u003ch3\u003eFull Line LED 3rd Brake Light – High-Brightness Rear Center Stop Lamp Upgrade for Enhanced Visibility \u0026amp; Safety PN: ILUAL3BL.\u003c\/h3\u003e\n\u003cp\u003eAs for all our LED-based products, PN: ILUAL3BL also integrates a Super Fast constant current driver.  We would never power LEDs directly from the car's power supply, as the voltage may vary significantly.  Furthermore, a car's power supply contains lots of electrical noise and turbulence, which must be filtered before powering LEDs. The constant current driver will provide a perfect, stable LED light and will make them last almost forever.\u003c\/p\u003e\n\u003cp\u003eTogether with our  LED tail light solutions, this new LED 3rd brake light will perfectly complete the rear of your car. Several clients found that this LED 3rd brake light integrates much better with the bodywork than the original one!\u003c\/p\u003e\n\u003cp\u003eIt will considerably increase your SAFETY thanks to a response time 50 times faster than the OEM incandescent lamps! A new filament lamp will take approximately 250 milliseconds to reach 90% of its asymptotic light output, causing potential delays in responses by following drivers. Aging lamps may have even a doubled response time.\u003c\/p\u003e\n\u003cp\u003eIn addition to that, our LED center stop light evenly illuminates the ENTIRE light cluster, with 200% more light than the stock 3rd brake light. Your safety is our first concern!\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not just a simple light, but it integrates many advanced technologies and features, which make this product incomparable to the original 3rd brake light:\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003eTotal reaction time of less than 5 milliseconds\u003c\/p\u003e\n\u003cp\u003e100% identical reaction time as our ILUAL LED Tail Light Packages\u003c\/p\u003e\n\u003cp\u003eThe entire light cluster is illuminated \u003c\/p\u003e\n\u003cp\u003eIntegrated Super Fast constant current driver\u003c\/p\u003e\n\u003cp\u003eComplete heat-proof protection\u003c\/p\u003e\n\u003cp\u003eSpecific vibration-absorbent rubber washers\u003c\/p\u003e\n\u003cp\u003eOptimized red transparent optical lens\u003c\/p\u003e\n\u003cp\u003eThe LED light system is almost invisible when not illuminated\u003c\/p\u003e\n\u003cp\u003eHigh-quality full line of LED light systems\u003c\/p\u003e\n\u003cp\u003eIdentical red color to our ILUAL LED Tail Light Kits\u003c\/p\u003e\n\u003cp\u003eVery long distance visible red color, but not blinding at short distances\u003c\/p\u003e\n\u003cp\u003eNever have to change the small filament lamps anymore, often charged at a high price by your dealer, and well more than the price of this kit.\u003c\/p\u003e\n\u003cp\u003eOur integrated electronics make it compatible with F1 cars (no F1 failure light)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOur Ferrari LED 3rd brake light can be installed in place of the OEM light on the following Ferrari cars:\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ca href=\"https:\/\/www.scuding.com\/Shop\/en\/12-f360-solutions\" class=\"productLink\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAnd also on the\u003c\/div\u003e\n\u003cp\u003eMaserati 4200 Spyder 2002+\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e: for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eF1\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecars on which aftermarket LED rear lights or LED lamps have been installed, which is not our LED rear lights package, you may have an F1 warning displayed on your dash when installing this FULL LINE LED 3RD BRAKE LIGHT. This is because such aftermarket LED rear lights do not integrate the needed features to avoid the F1 warning. In this case, you'll have to install our\u003cspan\u003e tool \u003c\/span\u003eto avoid any F1 issues.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eF-BRAKEFLASH OPTION - SAFETY BRAKE FLASHER ECU MODULE FOR CENTER BRAKE LIGHT - Version 3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn addition to this center LED Stop Light Cluster, please consider to completing it with our F-BrakeFlash F\u003cspan\u003elasher ECU Module \u003c\/span\u003e\u003c\/strong\u003e(please make your choice above when ordering):  Directly connected to the center LED stop light (no specific installation required), this Smart ECU module will flash the center LED Stop Light when you brake to get more attention from drivers behind you and alert traffic to stop! \u003cbr\u003e\u003cbr\u003eWhen the brake pedal is pressed, the center stop light will flash during the configured duration and at the configured speed (default 2 seconds - medium speed), then it will turn steady on. The duration of the flashes, as well as the flash speed, can easily be configured.  It's also possible to set the module in continuous flash mode, which will make the center stop light flash as long as the brake pedal is pressed. \u003cspan\u003eIt's now also possible to disable the ECU module, which will make the center stop light turn always steady on steadily.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe device features a unique reactivation timing system to minimize the annoyance of brake light flashes when the brakes are used in heavy traffic.  Your Ferrari LED third brake light will flash the configured number of times the first time the brake pedal is pressed, then the flashing effect is disabled if the brakes are pressed during the configured period of time (configurable between 4 and 20 seconds - default 10 seconds). In other words, the center stop light will flash each time the brake pedal is pressed for less than the configured timing; otherwise, it will turn steady on.\u003c\/p\u003e\n\u003cp\u003eIt also features a unique Pulsing mode (by default disabled). When activated, the brake light will flash between full and partial intensity. The brake light is never turned fully off, but goes between fully ON and dimmed. Among 9 brightness levels can be configured.\u003cbr\u003e\u003cbr\u003eWith the provided switch, this ECU module can be easily configured, and it's now also possible to easily revert to the factory defaults.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"www.gteeng.com\"\u003ewww.gteeng.com\u003c\/a\u003e\u003c\/p\u003e","brand":"Scud Ing Swiss","offers":[{"title":"Default Title","offer_id":58396949151825,"sku":"65713151741955","price":670.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/ilual3bl2-led-3rd-brake-light12.jpg?v=1763574202"},{"product_id":"center-fog-light-safety-flasher-ecu-system-for-ferrari-488-f12-v2","title":"CENTER FOG LIGHT SAFETY FLASHER ECU SYSTEM FOR FERRARI 488-F12 - V2 PN: F-BRAKEFLASH-FOG","description":"\u003cp\u003e\u003cstrong\u003eCENTER FOG LIGHT SAFETY FLASHER ECU SYSTEM FOR FERRARI 488-F12 - V2 PN: F-BRAKEFLASH-FOG\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis system will flash your\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOEM center fog light\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ewhen you brake\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto get more attention from drivers behind you and alert traffic to stop!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen the brake pedal is pressed, the center fog light will flash\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eduring the configured duration and at the configured speed (default 2 seconds - medium speed), then it will turn steady on. The duration of the flashes as well as the flash speed can easily be configured.  It's also possible to set the module in continuous flash mode which will make the center fog light flash as long as the brake pedal is pressed. \u003cspan\u003eIt's now also possible to disable the ECU module, which will make the center fog light to be disconnected from the brake lights.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe device features a unique re-activation timing system to minimize the annoyance of brake light flashes when the brakes are used in heavy traffic.  Your Ferrari LED center fog light will flash the configured number of times the first time the brake pedal is pressed, then the flash effect is disabled if the brakes were pressed during the configured period of time (configurable between 4 and 20 seconds - default 10 seconds). In other words, the center fog light will flash each time the brake pedal is pressed during less than the configured timing, otherwise, it will turn steady on.\u003c\/p\u003e\n\u003cp\u003eIt also features a unique Pulsing mode (by default disabled). When activated, the center fog light will flash between full and partial intensity, the fog light is never turned fully off but goes between fully ON and dimmed. Among 9 brightness levels can be configured.\u003cbr\u003e\u003cbr\u003eWith the provided switch, this ECU module can be easily configured and it's also possible to easily revert back to the factory defaults. To keep it simple, the system will be delivered entirely pre-configured. Please don't hesitate to contact us if you would like to have any preferred settings.\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eCenter Fog Light Safety Flasher configurable modes (see\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.scuding.com\/Shop\/en\/index.php?controller=attachment\u0026amp;id_attachment=75\" class=\"productlink\"\u003einstallation guide\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor all details):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"lists-check\"\u003e\n\u003cp\u003eFlash duration: from 1 to 8 seconds, continuous flashes or flashes disabled\u003c\/p\u003e\n\u003cp\u003eFlash speed rate: from 25 milliseconds (very fast) to 250 milliseconds (slow)\u003c\/p\u003e\n\u003cp\u003eReactivation timing: disabled or from 4 to 20 seconds\u003c\/p\u003e\n\u003cp\u003ePulsing mode: disabled or from 5% to 45% brightness\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis safety kit also contains an electronic fog light bypass module to allow the fog light to operate normally\u003cstrong\u003e,\u003c\/strong\u003e steady on \u003cstrong\u003ewhen the fog lights are turned on,\u003c\/strong\u003e and disables the brake safety flasher. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis solution will not trigger a warning light of any kind on the 488 \/ F12 instrument panel and is entirely compatible with the Body Computer.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Scud Ing Swiss","offers":[{"title":"Default Title","offer_id":58432435224657,"sku":"77715559226933","price":460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/fog-light-safety-flasher-ecu_3b6ddfa3-1d51-4b6a-af4d-dc947ce528d6.jpg?v=1764883847"}],"url":"https:\/\/www.gte-engineering.com\/zh\/collections\/electronics.oembed","provider":"GTE Engineering","version":"1.0","type":"link"}