{"title":"Selespeed","description":"\u003cp\u003eSelespeed actuator rebuild service for F1, E-Gear, ASM SportShift, and ISR transmissions. New and used parts are available for repair and restoration.\u003c\/p\u003e","products":[{"product_id":"f1-e-gear-selespeed-oil","title":"GTE F1, E-Gear \u0026 Selespeed Hydraulic Oil – 1 Liter – EG-OIL-GTE","description":"\u003cp\u003eGTE’s special-blend hydraulic oil for electrohydraulic shift and clutch-control service, supplied in a 1-liter bottle. EG-OIL-GTE is the GTE catalog reference.\u003c\/p\u003e\u003ch2\u003eParts and service details\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied quantity\u003c\/th\u003e\n\u003ctd\u003e1 liter of GTE special-blend hydraulic oil.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSystem selection\u003c\/th\u003e\n\u003ctd\u003eUse only where the supplied fluid specification matches the vehicle manufacturer’s requirement for the actual hydraulic circuit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBefore purchase\u003c\/th\u003e\n\u003ctd\u003eReview the supplied fluid specification and safety data before use. Vehicle make or an F1, E-Gear or Selespeed name alone does not establish fluid compatibility.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorkshop use\u003c\/th\u003e\n\u003ctd\u003eFollow the vehicle-specific filling and bleeding procedure. Do not mix this product with another fluid unless the applicable specification explicitly permits it.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003csection class=\"gte-product-safety-documentation\" aria-label=\"Safety documentation\"\u003e\u003ch2\u003eSafety documentation\u003c\/h2\u003e\n\u003cp\u003eA safety data sheet (SDS) specific to the finished GTE blend is being prepared and is not yet available. \u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eContact GTE for current product documentation\u003c\/a\u003e before use.\u003c\/p\u003e\u003c\/section\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eThe customer or installing workshop is responsible for selecting the correct fluid. Ask GTE for the supplied product details; GTE does not perform vehicle fitment or VIN-to-part confirmation.\u003c\/p\u003e\u003ch3\u003eGallery\u003c\/h3\u003e\u003cp\u003eThe bottle image is an illustration. Refer to the supplied container label and product documentation for fluid identification and handling information.\u003c\/p\u003e\u003csection class=\"gte-product-guides\" aria-label=\"Related product information\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 \u0026amp; E-Gear Actuator Rebuilding\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/section\u003e\n\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":41413118820433,"sku":"47806197734979","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/eg-oil-gte-f1-e-gear-selespeed-hydraulic-oil-bottle-illustration.png?v=1793742932"},{"product_id":"ferrari-f1-360-actuator-hydraulic-hose-set","title":"Ferrari 360 F1 Hydraulic Actuator Hose Set","description":"\u003cp\u003eGTE builds replacement F1 hydraulic hoses in the USA to match the supplied original hose configuration.\u003c\/p\u003e\u003ch2\u003eParts and service details\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEV1\u003c\/th\u003e\n\u003ctd\u003e179340 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEV2\u003c\/th\u003e\n\u003ctd\u003e179342 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEV3\u003c\/th\u003e\n\u003ctd\u003e179343 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEV4\u003c\/th\u003e\n\u003ctd\u003e179344 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEV5\u003c\/th\u003e\n\u003ctd\u003e179345 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePump to block\u003c\/th\u003e\n\u003ctd\u003e179348 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRecirculation line\u003c\/th\u003e\n\u003ctd\u003eOriginal-hose pattern — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSeven-line set for the applicable Ferrari 360 F1 installation. The recirculation line is made to the original pattern; 248088 is cataloged for F430 and is not asserted here as a verified 360 OEM reference.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOriginal hoses\u003c\/th\u003e\n\u003ctd\u003eSend the old set labeled by circuit, together with the service form, for length and fitting measurements before GTE assembles the replacement set.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eThe installer is responsible for routing, clean assembly, the specified hydraulic fluid, bleeding and system checks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eChoose by the actual hose routing, circuit labels and fittings, not model year alone. Replacing damaged hoses does not resolve unrelated pump, actuator or electrical faults.\u003c\/p\u003e\u003ch3\u003eGallery\u003c\/h3\u003e\u003cp\u003eThe GTE overview and close-up images show hose workmanship. Some views are shared examples; lengths, fittings and quantities vary by application. The installed PowerShift view, where shown, is context and not an included component.\u003c\/p\u003e\u003csection class=\"gte-product-guides\" aria-label=\"Related product information\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 \u0026amp; E-Gear Actuator Rebuilding\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/section\u003e\n\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.\u003c\/p\u003e\u003cp class=\"gte-hose-gallery-note\"\u003e\u003cstrong\u003eGallery:\u003c\/strong\u003e GTE hose-set overview and detail views show our workmanship. Hose lengths, fittings and quantities vary by application; refer to this product’s kit contents.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":58260129546321,"sku":"58957707799630","price":1280.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/gte-hydraulic-hose-set-01-overview.png?v=1793352707"},{"product_id":"ferrari-f430-and-f360-f1-clutch-hose-174554-239429","title":"Ferrari 360 \u0026 F430 F1 Clutch Hose – 174554 \/ 236790 \/ 239429","description":"\u003ch2\u003eFerrari 360 \u0026amp; F430 F1 Clutch Hose – 174554 \/ 236790 \/ 239429\u003c\/h2\u003e\u003cp\u003eReplacement F1 clutch hose with heat-shield sheathing, built by GTE Engineering. Order the hose configuration appropriate to the original component; the reference list does not mean three hoses are supplied.\u003c\/p\u003e\u003ch3\u003ePart Reference and Application\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e174554\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eClutch pipe reference catalogued for Ferrari 360 and F430 applications.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e236790 \/ 239429\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eF430 catalogue replacement sequence: 174554 to 236790 to 239429. A supersession does not replace checking the installed assembly and connections.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.\u003c\/p\u003e\u003ch3\u003eSupply Scope and Exclusions\u003c\/h3\u003e\u003cp\u003eThe quick-coupler is sold separately. Send the old hose if existing parts are to be assessed for reuse. This is a clutch-control hose, not the EV1–EV5 actuator hose set.\u003c\/p\u003e\u003cp\u003eFerrari part numbers identify the application. This listing is for the GTE replacement assembly, not a claim that GTE manufactures the original Ferrari part.\u003c\/p\u003e\u003ch3\u003eHow to Order and Prepare Your Hose\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eYour installer must identify the correct pipe, vehicle configuration and connection arrangement before ordering.\u003c\/li\u003e\n\u003cli\u003eContact GTE to arrange the original-hose shipment for dimensional recording and assessment of reusable fittings. Include your order details and identify the hose circuit.\u003c\/li\u003e\n\u003cli\u003eAgree the required assembly and any separately supplied fittings. Follow the \u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eshipping instructions\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eHave the completed hose installed using the applicable workshop procedure, followed by hydraulic leak and operational checks.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eProduct Images\u003c\/h3\u003e\u003cp\u003eThe shared photograph shows hydraulic hose construction and fittings as a workmanship example. It does not show the exact reference or supplied quantity for every listing. A quick-coupler visible in the example is not included in the hose price.\u003c\/p\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes a new hose fix every shifting or hydraulic fault?\u003c\/strong\u003e\u003cbr\u003eNo. Vehicle diagnosis must identify the cause; a hose replacement does not replace checks of other hydraulic and electrical components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes GTE identify the correct part from my VIN?\u003c\/strong\u003e\u003cbr\u003eNo. The customer or sender is responsible for part selection and compatibility.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eDiscuss assembly scope and shipping with GTE\u003c\/a\u003e · \u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eProduct and rebuild guides\u003c\/a\u003e\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":58261268987985,"sku":"59065138742797","price":380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/gte-hydraulic-hoses-shared-workmanship-example.webp?v=1793330181"},{"product_id":"ferrari-f430-f1-e-diff-hose-204431","title":"Ferrari F430 Hydraulic Delivery Hose – 204431","description":"\u003ch2\u003eFerrari F430 Hydraulic Delivery Hose – 204431\u003c\/h2\u003e\u003cp\u003eGTE Engineering replacement hydraulic delivery hose for applicable Ferrari F430 systems, reference 204431. The original listing describes E-Diff service; selection must be based on the installed pipe and circuit, not a generic clutch-hose photograph.\u003c\/p\u003e\u003ch3\u003ePart Reference and Application\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e204431\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFerrari F430 delivery-pipe reference in the power-unit and tank catalogue. Match the actual hydraulic circuit and original connections.\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.\u003c\/p\u003e\u003ch3\u003eSupply Scope and Exclusions\u003c\/h3\u003e\u003cp\u003eThe quick-coupler is sold separately. Send the original hose for sizing and assessment of any fittings that may need to be reused. Clutch-pipe references 174554, 236790 and 239429 do not identify this hose.\u003c\/p\u003e\u003cp\u003eFerrari part numbers identify the application. This listing is for the GTE replacement assembly, not a claim that GTE manufactures the original Ferrari part.\u003c\/p\u003e\u003ch3\u003eHow to Order and Prepare Your Hose\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eYour installer must identify the correct pipe, vehicle configuration and connection arrangement before ordering.\u003c\/li\u003e\n\u003cli\u003eContact GTE to arrange the original-hose shipment for dimensional recording and assessment of reusable fittings. Include your order details and identify the hose circuit.\u003c\/li\u003e\n\u003cli\u003eAgree the required assembly and any separately supplied fittings. Follow the \u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eshipping instructions\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eHave the completed hose installed using the applicable workshop procedure, followed by hydraulic leak and operational checks.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eProduct Images\u003c\/h3\u003e\u003cp\u003eThe shared photograph shows hydraulic hose construction and fittings as a workmanship example. It does not show the exact reference or supplied quantity for every listing. A quick-coupler visible in the example is not included in the hose price.\u003c\/p\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes a new hose fix every shifting or hydraulic fault?\u003c\/strong\u003e\u003cbr\u003eNo. Vehicle diagnosis must identify the cause; a hose replacement does not replace checks of other hydraulic and electrical components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes GTE identify the correct part from my VIN?\u003c\/strong\u003e\u003cbr\u003eNo. The customer or sender is responsible for part selection and compatibility.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eDiscuss assembly scope and shipping with GTE\u003c\/a\u003e · \u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eProduct and rebuild guides\u003c\/a\u003e\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":58261273673809,"sku":"59160731180664","price":445.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/gte-hydraulic-hoses-shared-workmanship-example.webp?v=1793330181"},{"product_id":"ferrari-f430-hydraulic-f1-hose-set-248096-248097-248098-248099-248100-248101-179346","title":"Ferrari F430 F1 Hydraulic Hose Set – 248098\/248099\/248100 Configuration","description":"\u003cp\u003eGTE builds replacement F1 hydraulic hoses in the USA to match the supplied original hose configuration.\u003c\/p\u003e\u003ch2\u003eParts and service details\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEV1\u003c\/th\u003e\n\u003ctd\u003e248096 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEV2\u003c\/th\u003e\n\u003ctd\u003e248097 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEV3\u003c\/th\u003e\n\u003ctd\u003e248098 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEV4\u003c\/th\u003e\n\u003ctd\u003e248099 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEV5\u003c\/th\u003e\n\u003ctd\u003e248100 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEVF\u003c\/th\u003e\n\u003ctd\u003e248101 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eThe six lines correspond to the F430 catalog configuration using EV3 248098, EV4 248099 and EV5 248100. This listing was previously labeled 2004–2006; the actual installed configuration governs selection, including cars with later repairs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOriginal hoses\u003c\/th\u003e\n\u003ctd\u003eSend the old set labeled by circuit, together with the service form, for length and fitting measurements before GTE assembles the replacement set.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eThe installer is responsible for routing, clean assembly, the specified hydraulic fluid, bleeding and system checks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcluded hardware\u003c\/th\u003e\n\u003ctd\u003eBanjo hardware and washers are not included. Protection sheath 179346 is available separately. The hose set is not a complete actuator or hydraulic power unit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eChoose by the actual hose routing, circuit labels and fittings, not model year alone. Replacing damaged hoses does not resolve unrelated pump, actuator or electrical faults.\u003c\/p\u003e\u003ch3\u003eGallery\u003c\/h3\u003e\u003cp\u003eThe GTE overview and close-up images show hose workmanship. Some views are shared examples; lengths, fittings and quantities vary by application. The installed PowerShift view, where shown, is context and not an included component.\u003c\/p\u003e\u003csection class=\"gte-product-guides\" aria-label=\"Related product information\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 \u0026amp; E-Gear Actuator Rebuilding\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/section\u003e\n\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.\u003c\/p\u003e\u003cp class=\"gte-hose-gallery-note\"\u003e\u003cstrong\u003eGallery:\u003c\/strong\u003e GTE hose-set overview and detail views show our workmanship. Hose lengths, fittings and quantities vary by application; refer to this product’s kit contents.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":58261291040849,"sku":"59353295438551","price":1380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/gte-hydraulic-hose-set-01-overview.png?v=1793352707"},{"product_id":"ferrari-f430-scuderia-rhd-hydraulic-f1-hose-set","title":"Ferrari F430 \u0026 Scuderia F1 Hose Set – 248400\/248401\/248402 Configuration","description":"\u003cp\u003eGTE builds replacement F1 hydraulic hoses in the USA to match the supplied original hose configuration.\u003c\/p\u003e\u003ch2\u003eParts and service details\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEV1\u003c\/th\u003e\n\u003ctd\u003e248096 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEV2\u003c\/th\u003e\n\u003ctd\u003e248097 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEV3\u003c\/th\u003e\n\u003ctd\u003e248400 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEV4\u003c\/th\u003e\n\u003ctd\u003e248401 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEV5\u003c\/th\u003e\n\u003ctd\u003e248402 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEVF\u003c\/th\u003e\n\u003ctd\u003e248101 — application reference for the replacement line, not a claim that GTE hoses are factory-supplied parts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eThe 248400\/248401\/248402 configuration is documented for 430 Scuderia and Spider 16M, including RHD catalog diagrams. F430 MY2006–2008 or other RHD cars must match the actual installed lines; steering side or year alone does not establish interchange with the earlier configuration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOriginal hoses\u003c\/th\u003e\n\u003ctd\u003eSend the old set labeled by circuit, together with the service form, for length and fitting measurements before GTE assembles the replacement set.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eThe installer is responsible for routing, clean assembly, the specified hydraulic fluid, bleeding and system checks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcluded hardware\u003c\/th\u003e\n\u003ctd\u003eBanjo hardware and washers are not included. Protection sheath 179346 is available separately. The hose set is not a complete actuator or hydraulic power unit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eChoose by the actual hose routing, circuit labels and fittings, not model year alone. Replacing damaged hoses does not resolve unrelated pump, actuator or electrical faults.\u003c\/p\u003e\u003ch3\u003eGallery\u003c\/h3\u003e\u003cp\u003eThe GTE overview and close-up images show hose workmanship. Some views are shared examples; lengths, fittings and quantities vary by application. The installed PowerShift view, where shown, is context and not an included component.\u003c\/p\u003e\u003csection class=\"gte-product-guides\" aria-label=\"Related product information\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 \u0026amp; E-Gear Actuator Rebuilding\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/section\u003e\n\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.\u003c\/p\u003e\u003cp class=\"gte-hose-gallery-note\"\u003e\u003cstrong\u003eGallery:\u003c\/strong\u003e GTE hose-set overview and detail views show our workmanship. Hose lengths, fittings and quantities vary by application; refer to this product’s kit contents.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":58261314437201,"sku":"59478802648128","price":1380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/gte-hydraulic-hose-set-01-overview.png?v=1793352707"},{"product_id":"599-gtb-fiorano-f1-clutch-hydraulic-clutch-set-247239-247240-248354-248355-248356","title":"Ferrari 599 GTB F1 Hydraulic Hose Set — EV1–EV5 \u0026 EVF","description":"\u003ch2\u003eFerrari 599 GTB Fiorano F1 Hydraulic Hose Set\u003c\/h2\u003e\u003cp\u003eGTE Engineering supplies a hand-assembled, pressure-tested hose set for the Ferrari 599 GTB Fiorano F1 transmission system. The set includes five gear-selection hoses and one clutch hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSend-in requirement:\u003c\/strong\u003e You must send the old full hose set to GTE for sizing and the special banjo fittings. Follow the current shipping instructions before dispatch.\u003c\/p\u003e\u003ch3\u003eIncluded Hose References\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e247239\u003c\/td\u003e\n\u003ctd\u003eEV1 gear-selection hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e247240\u003c\/td\u003e\n\u003ctd\u003eEV2 gear-selection hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e248354\u003c\/td\u003e\n\u003ctd\u003eEV3 gear-selection hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e248355\u003c\/td\u003e\n\u003ctd\u003eEV4 gear-selection hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e248356\u003c\/td\u003e\n\u003ctd\u003eEV5 gear-selection hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e248330\u003c\/td\u003e\n\u003ctd\u003eEVF clutch hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese are Ferrari application references for the corresponding hose positions. The offering is GTE’s hose service\/set; a hydraulic actuator, pump, valve body or complete transmission is not included.\u003c\/p\u003e\u003ch3\u003eHow the Service Works\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eYour technician verifies the installed F1 system and the six hose references.\u003c\/li\u003e\n\u003cli\u003eSend the old full set, keeping its hose-position identification intact, for sizing and special banjo fittings.\u003c\/li\u003e\n\u003cli\u003eGTE hand-assembles and pressure-tests the replacement hoses for the agreed configuration.\u003c\/li\u003e\n\u003cli\u003eHave the set installed and the system checked using the applicable workshop procedures.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003ePhotograph Notes\u003c\/h3\u003e\u003cp\u003eThe photographs are shared hydraulic-hose workmanship examples showing crimp sleeves, an elbow fitting, banjo ends and a quick-coupler. They are not a photograph of this exact six-hose set and do not define included quantities or fittings. Original close-ups and identification details are retained; the reference table and send-in requirements define this listing.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 and E-Gear service guide\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eProduct Help\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eContact GTE about the product or service\u003c\/a\u003e. For send-in work, follow the \u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003ecurrent shipping instructions\u003c\/a\u003e.\u003c\/p\u003e\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.\u003c\/p\u003e\u003cp class=\"gte-hose-gallery-note\"\u003e\u003cstrong\u003eGallery:\u003c\/strong\u003e GTE hose-set overview and detail views show our workmanship. Hose lengths, fittings and quantities vary by application; refer to this product’s kit contents.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":58268151742545,"sku":"60893033181841","price":1480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/gte-hydraulic-hose-set-01-overview.png?v=1793352707"},{"product_id":"lamborghini-gallardo-pre-lp-e-gear-hydraulic-actuator-hose-set-0r1400452","title":"Lamborghini Gallardo Pre-LP E-Gear Actuator Hose Set — 0R1400452","description":"\u003ch2\u003eLamborghini Gallardo Pre-LP E-Gear Actuator Hose Set — 0R1400452\u003c\/h2\u003e\u003cp\u003eGTE hand-assembles and pressure-tests the five gear-selection hoses for the pre-LP Gallardo actuator. Send the complete original set so GTE can match its lengths and special banjo fittings.\u003c\/p\u003e\u003ch3\u003eParts and service scope\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKit application reference\u003c\/th\u003e\n\u003ctd\u003e0R1400452 identifies the E-Gear pipe set.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded positions\u003c\/th\u003e\n\u003ctd\u003eEV1, EV2, EV3, EV4 and EV5. One hose per position.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClutch circuit\u003c\/th\u003e\n\u003ctd\u003eThe EVF clutch hose is sold separately. Oil, actuator and power unit are outside this order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eOne-year craftsmanship warranty covering manufacturing defects.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eBefore ordering\u003c\/h3\u003e\u003cp\u003eMatch the original E-Gear actuator and hose routing, label the five positions and follow the shipping instructions for the complete old set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGallery.\u003c\/strong\u003e The overview shows the pre-LP Gallardo set. Close-ups illustrate shared GTE hose workmanship.\u003c\/p\u003e\u003csection class=\"gte-product-guides\" aria-label=\"Related product information\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 \u0026amp; E-Gear Actuator Rebuilding\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/section\u003e\n\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":58270613733457,"sku":"63015419916570","price":1680.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/0r1400452-lamborghini-gallardo-pre-lp-e-gear-actuator-hose-set.png?v=1793394954"},{"product_id":"lamborghini-evf-clutch-line-07l115673-086325089a","title":"Lamborghini Gallardo E-Gear EVF Clutch Hose Conversion","description":"\u003cp\u003eGTE converts the original EVF clutch hydraulic line on applicable pre-LP Lamborghini Gallardo E-Gear cars. A continuous hose replaces the factory quick-disconnect arrangement between the power unit and the lower transmission connection.\u003c\/p\u003e\u003ch2\u003eParts and service details\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOriginal references\u003c\/th\u003e\n\u003ctd\u003e07L115673 is the E-Gear pipe. 086325089A is the separate connection line. These identify parts of the original routing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRequired core\u003c\/th\u003e\n\u003ctd\u003eSend the complete original hose assembly set so the fittings, length and routing can be matched.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorkshop scope\u003c\/th\u003e\n\u003ctd\u003eThe converted line is checked for flow and pressure integrity before return.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eProfessional installation is recommended. The clutch circuit must be bled after installation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eCheck the original fittings and routing on your 2003–2008 Gallardo E-Gear before sending the set. This order covers the EVF clutch line. The five-line gear-selection hose set is a separate service.\u003c\/p\u003e\u003ch3\u003eGallery\u003c\/h3\u003e\u003cp\u003eThe studio views show the converted hose and its banjo connection. The original installation photos mark the routing and gearbox connection with red arrows.\u003c\/p\u003e\u003csection class=\"gte-product-guides\" aria-label=\"Related product information\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 \u0026amp; E-Gear Actuator Rebuilding\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/section\u003e\n\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":58306621833297,"sku":"64189748080033","price":520.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/07l115673-086325089a-lamborghini-gallardo-evf-clutch-hose-overview-gte.jpg?v=1793398567"},{"product_id":"ferrari-f430-f1-hydraulic-actuator-rebuild-234259-248399-220244-248084","title":"Ferrari F430 F1 \u0026 430 Scuderia F1s Actuator Rebuild","description":"\u003cp\u003eGTE rebuilds the customer-supplied hydraulic shift actuator for Ferrari F430 F1 and 430 Scuderia F1s applications. Select your model before ordering.\u003c\/p\u003e\u003ch2\u003eParts and service details\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel choices\u003c\/th\u003e\n\u003ctd\u003eChoose F430 F1 or 430 Scuderia F1s. Each variant shows its matching reference photo; the gold GTE F1s SuperFast installation photo is the Scuderia example.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eF430 actuator references\u003c\/th\u003e\n\u003ctd\u003eFerrari lists 220244 as a hydraulic actuator, replacing 183064 and followed by 248084. Check the original unit and production-specific diagram.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRelated kits\u003c\/th\u003e\n\u003ctd\u003e248399 identifies a hydraulic actuator kit. 234259 identifies a broader F1 system components kit. The service price covers the supplied actuator.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorkshop scope\u003c\/th\u003e\n\u003ctd\u003eDisassembly, inspection, chemical and ultrasonic cleaning, internal seal replacement, reassembly and bench checks for pressure retention and internal leakage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeparate work\u003c\/th\u003e\n\u003ctd\u003eThe hose set, fluid and hydraulic power-unit rebuild are available separately. Installation, bleeding and setup can be arranged at GTE.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eShip your original actuator. Cracks, severe mechanical damage or prior repairs may require separate approval. Turnaround depends on condition and workshop workload.\u003c\/p\u003e\u003ch3\u003eGallery\u003c\/h3\u003e\u003cp\u003eThe isolated GTE studio view shows the serviced actuator with its Marelli label, capped ports and inspection markings. The original collage and detail views retain workshop identification evidence and the installed GTE PowerShift component. These are service examples rather than all parts of a factory kit.\u003c\/p\u003e\u003csection class=\"gte-product-guides\" aria-label=\"Related product information\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 \u0026amp; E-Gear Actuator Rebuilding\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-related-guides\"\u003e\u003ch3\u003eRelated technical guides\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/gte-f1-superfast-f1-actuator-rebuild\"\u003eGTE F1s Superfast™ Actuator Rebuild \u0026amp; Upgrade\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-egear-rebuilding\"\u003eAutomated Manual Systems: Diagnosis \u0026amp; Rebuild Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/glossary\"\u003eTechnical Glossary\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/downloads\"\u003eDownloads\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/workshop-services\"\u003eGTE Engineering Workshop \u0026amp; Rebuild Capabilities\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\n\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"F430 F1","offer_id":58566692274257,"sku":"87971203024110","price":3400.0,"currency_code":"USD","in_stock":true},{"title":"F430 Scuderia F1s","offer_id":63482704592977,"sku":"GTE-430-SCUDERIA-F1S","price":4800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/ferrari-f430-f1-shift-actuator-service-example-marelli-label-gte.png?v=1793409166"},{"product_id":"lamborghini-gallardo-r8-rebuild-086398162a","title":"Lamborghini Gallardo LP \u0026 Audi R8 Hydraulic Power Unit Rebuild – 086398162A","description":"\u003cp\u003eGTE rebuilds the customer’s hydraulic power unit for applicable Lamborghini Gallardo LP E-Gear and Audi R8 R-Tronic systems.\u003c\/p\u003e\u003ch2\u003eParts and service details\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower-unit references\u003c\/th\u003e\n\u003ctd\u003e086398162A and 086398162 identify high-pressure pump assemblies. Match the complete number and configuration on the original unit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRelated components\u003c\/th\u003e\n\u003ctd\u003e086959755 is the DC pump motor. 086301247C is a gear-selector\/actuator reference, not an equivalent pump number.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIncluded work\u003c\/th\u003e\n\u003ctd\u003eDisassembly, cleaning, inspection, replacement of the pump motor and accumulator, attention to internal wear components, reassembly and testing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinal checks\u003c\/th\u003e\n\u003ctd\u003ePressure output, leakage and system response are checked before return.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eThe installing workshop must bleed the system and complete the relevant setup procedures. This is separate from a mechanical gearbox or clutch rebuild.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eSend your original power unit after arranging the service. Confirm the installed E-Gear or R-Tronic assembly; the R8 S-Tronic dual-clutch system is a different application.\u003c\/p\u003e\u003ch3\u003eGallery\u003c\/h3\u003e\u003cp\u003eThe GTE gallery shows a serviced power unit and a close view of its motor, hoses, reservoir and original identification label. Security seals, witness marks and the inspection tag remain visible.\u003c\/p\u003e\u003csection class=\"gte-product-guides\" aria-label=\"Related product information\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 \u0026amp; E-Gear Actuator Rebuilding\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-related-guides\"\u003e\u003ch3\u003eRelated technical guides\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/audi-r8\"\u003eAudi R8 Clutch Rebuild Guide | PEGA\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-egear-rebuilding\"\u003eAutomated Manual Systems: Diagnosis \u0026amp; Rebuild Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\n\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":59264497254481,"sku":"88909158267232","price":2450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/086398162a-086398162-lamborghini-gallardo-lp-audi-r8-power-unit-gte.png?v=1793405256"},{"product_id":"ferrari-maserati-throwout-bearing-rebuild-service-234943","title":"Ferrari \u0026 Maserati Clutch Release Bearing Rebuild – 234943 \/ 234953","description":"\u003cp\u003eGTE rebuilds and reseals customer-supplied hydraulic clutch release bearings used in applicable Ferrari and Maserati dry-clutch systems.\u003c\/p\u003e\u003ch2\u003eParts and service details\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSelect the fluid system\u003c\/th\u003e\n\u003ctd\u003eChoose F1 Hydraulic Type oil for the applicable automated-manual assembly, or the DOT brake-fluid option for the applicable manual system. Seal material must match the actual hydraulic fluid.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003e234943 and 234953\u003c\/th\u003e\n\u003ctd\u003e234943 is cataloged as a release bearing without seals; Ferrari records list 208310 and 234953 as earlier references. Maserati 234953 is supplied with seals and replaces 190771 and 201023.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOther bearing versions\u003c\/th\u003e\n\u003ctd\u003e201024, 178331 and 181827 appear in model-specific clutch-bearing records. These references describe different bearing\/seal configurations, not a universal interchange list.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRebuild scope\u003c\/th\u003e\n\u003ctd\u003eInspection and professional resealing of the original bearing using upgraded seals and the listed bearing treatment process. Serviceability depends on the condition of the supplied unit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eCheck the exact clutch-controls diagram for your Ferrari 360, F430, 599, 612 or Enzo, or Maserati 4200, GranTurismo or Quattroporte M139. Model name alone does not establish the bearing version.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eIdentify the removed bearing, transmission and specified hydraulic fluid before choosing the service. Do not mix fluid types or select seals solely by a shared casting number.\u003c\/p\u003e\u003ch3\u003eGallery\u003c\/h3\u003e\u003cp\u003eThe two GTE photographs show a serviced release bearing from the face and side, with capped ports, colored witness marks, security seal and inspection paperwork. They are service examples rather than evidence of every listed bearing version.\u003c\/p\u003e\u003csection class=\"gte-product-guides\" aria-label=\"Related product information\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-and-e-gear-clutch-rebuild\"\u003eF1 \u0026amp; E-Gear Clutch Rebuild \u0026amp; Installation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-related-guides\"\u003e\u003ch3\u003eRelated technical guides\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/zh\/pages\/ferrari\"\u003eFerrari Clutch Rebuild Guide | PEGA\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/section\u003e\n\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"F1 Hydraulic Type oil","offer_id":63094932570193,"sku":"89053560432255","price":480.0,"currency_code":"USD","in_stock":true},{"title":"Break Oil \"DOT\" hydraulic Type oil","offer_id":63094932602961,"sku":"89053560432256","price":680.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/ferrari-maserati-release-bearing-service-example-face-inspection-tag-gte.png?v=1793405256"},{"product_id":"lamborghini-gallardo-lp-r8-hydraulic-control-unit-actuator-rebuild-086398163b","title":"Lamborghini Gallardo LP \u0026 Audi R8 Shift Actuator Rebuild – 086398163B","description":"\u003ch2\u003eGallardo LP E-Gear \u0026amp; Audi R8 R tronic Shift Actuator Rebuild\u003c\/h2\u003e\n\u003cp\u003eGTE Engineering rebuilds the hydraulic gear-selection actuator used in applicable Lamborghini Gallardo LP E-Gear and Audi R8 R tronic automated-manual systems. This is an actuator service, separate from clutch rebuilding or a complete mechanical transmission rebuild.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart-number references:\u003c\/strong\u003e 086398163B, 086398163A, 086398163. The customer or qualified installer must match the identification on the installed actuator and the vehicle application before ordering.\u003c\/p\u003e\n\u003ch3\u003eRebuild scope and additional parts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDisassembly, cleaning, inspection and measurement of the supplied actuator.\u003c\/li\u003e\n\u003cli\u003eRebuilding, reassembly and functional testing.\u003c\/li\u003e\n\u003cli\u003eSensor testing; replacement sensors are not included.\u003c\/li\u003e\n\u003cli\u003eElectrovalve testing and calibration. If a sensor or electrovalve is damaged, GTE will advise the additional parts cost before replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCustomer's rebuildable core required.\u003c\/strong\u003e Arrange the service and confirm what to send before shipping. Additional damage and repairs outside the agreed scope must be addressed in the estimate.\u003c\/p\u003e\n\u003ch3\u003eApplication checks\u003c\/h3\u003e\n\u003cp\u003eCatalog applications include Audi R8 4.2 R tronic (2008–2012) and 5.2 R tronic (2009–2012), and applicable Gallardo LP550, LP560 and LP570 E-Gear variants, including relevant Superleggera, Performante, Squadra Corse and Super Trofeo Stradale configurations. Verify the actual assembly; a model badge alone does not confirm fitment. This is not an Audi S tronic dual-clutch actuator listing.\u003c\/p\u003e\n\u003ch3\u003eShifting faults and vehicle setup\u003c\/h3\u003e\n\u003cp\u003eLeaks, internal wear, contamination, valve faults and sensor problems can contribute to gear-selection or engagement concerns. Vehicle diagnosis must also assess the hydraulic supply, clutch and electrical systems. Send the symptoms, fault codes and previous repair history with your request.\u003c\/p\u003e\n\u003cp\u003eRemoval, installation, bleeding and applicable learning or calibration procedures must be coordinated with the installing workshop and the approved service scope.\u003c\/p\u003e\n\u003ch3\u003eGuides and next steps\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 \u0026amp; E-Gear actuator rebuild guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/graziano-transmission-rebuild\"\u003eGraziano transmission rebuild guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/audi-r8-service-repair\"\u003eAudi R8 Service \u0026amp; Repair\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/lamborghini-service-repair\"\u003eLamborghini Service \u0026amp; Repair\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eRequest a rebuild assessment\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/warranty\"\u003eWarranty coverage\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse rebuild and product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003csection class=\"gte-related-guides\"\u003e\u003ch3\u003eRelated technical guides\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/audi-r8\"\u003eAudi R8 Clutch Rebuild Guide | PEGA\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-egear-rebuilding\"\u003eAutomated Manual Systems: Diagnosis \u0026amp; Rebuild Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\n\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":59664859332689,"sku":"89164991323590","price":1450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/086398163b-lamborghini-gallardo-lp-audi-r8-shift-actuator-valve-body-gte.png?v=1793405256"},{"product_id":"lamborghini-gallardo-actuator-rebuild-086325059","title":"Lamborghini Gallardo Pre-LP E-Gear Actuator Rebuild – 086325059","description":"\u003cp\u003eGTE rebuilds and returns your original pre-LP Lamborghini Gallardo E-Gear hydraulic actuator, reference 086325059.\u003c\/p\u003e\u003ch2\u003eParts and service details\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eService format\u003c\/th\u003e\n\u003ctd\u003eSend-in rebuild of the same supplied actuator. No core charge; this is not an exchange-unit sale.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorkshop scope\u003c\/th\u003e\n\u003ctd\u003eFull disassembly, cleaning, inspection, machining where required, replacement of seals, O-rings, gaskets and required hardware within the agreed rebuild scope.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinal checks\u003c\/th\u003e\n\u003ctd\u003eReassembly, calibration and hydraulic pressure testing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectronics\u003c\/th\u003e\n\u003ctd\u003ePosition sensors and electronic components are not included unless specifically stated in the agreed service.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eOne-year craftsmanship warranty.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIdentification\u003c\/th\u003e\n\u003ctd\u003e086325059 is cataloged for the pre-LP Gallardo E-Gear actuator group. Later LP actuator and power-unit references are different assemblies.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMatch the installed actuator and send your fault symptoms and repair history with the unit. Additional damage or work outside the service scope must be addressed in the estimate.\u003c\/p\u003e\u003ch3\u003eGallery\u003c\/h3\u003e\u003cp\u003eThe GTE photographs show serviced pre-LP actuator examples from the mechanism and rear sides. Fluid bottles and surrounding hardware provide workshop context. Original close-ups retain installation and mechanism evidence.\u003c\/p\u003e\u003csection class=\"gte-product-guides\" aria-label=\"Related product information\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 \u0026amp; E-Gear Actuator Rebuilding\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-related-guides\"\u003e\u003ch3\u003eRelated technical guides\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-egear-rebuilding\"\u003eAutomated Manual Systems: Diagnosis \u0026amp; Rebuild Guide\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/section\u003e\n\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":59709101277265,"sku":"89242295116988","price":3640.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/086325059-lamborghini-gallardo-pre-lp-egear-actuator-open-mechanism-gte.png?v=1793405256"},{"product_id":"ferrari-f355-f1-hl-complete-hydraulic-system-rebuild","title":"Ferrari F355 F1-HL Complete Hydraulic System Rebuild – 175834","description":"\u003cp\u003eGTE Engineering rebuilds the \u003cstrong\u003eFerrari F355 F1-HL hydraulic system\u003c\/strong\u003e in-house as a complete, coordinated assembly. This \u003cstrong\u003esend-in rebuild service at the price shown above\u003c\/strong\u003e covers the F1 actuator, hydraulic power unit and a full new hose set, together with a new accumulator, new electric pump motor, seals, cleaning and component refurbishment. \u003cstrong\u003eYou must send your complete system, including the actuator, power unit and original hose set, to GTE Engineering for this service.\u003c\/strong\u003e\u003c\/p\u003e\n\u003csection class=\"gte-related-part-numbers\"\u003e\n\u003ch2\u003eFerrari F355 F1 system and related part numbers\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSystem-kit reference: 175834.\u003c\/strong\u003e The Ferrari parts catalogue identifies this as the F1 gearbox system components kit. The references below identify the associated assemblies and hydraulic lines.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eComponent\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eFerrari reference\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eF1 gearbox system components kit\u003c\/td\u003e\n\u003ctd\u003e175834\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComplete hydraulic actuator\u003c\/td\u003e\n\u003ctd\u003e177687 (supersedes 167950)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComplete hydraulic power unit\u003c\/td\u003e\n\u003ctd\u003e177686 (supersedes 166511)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEV1 hydraulic hose\/pipe\u003c\/td\u003e\n\u003ctd\u003e168466\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEV2 hydraulic hose\/pipe\u003c\/td\u003e\n\u003ctd\u003e168468\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEV3 hydraulic hose\/pipe\u003c\/td\u003e\n\u003ctd\u003e168470\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEV4 hydraulic hose\/pipe\u003c\/td\u003e\n\u003ctd\u003e168472\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEV5 hydraulic hose\/pipe\u003c\/td\u003e\n\u003ctd\u003e168474\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump-to-block hydraulic pipe\u003c\/td\u003e\n\u003ctd\u003e175833\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOil return tube\u003c\/td\u003e\n\u003ctd\u003e179255 (earlier 168483)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOil delivery tube\u003c\/td\u003e\n\u003ctd\u003e179254 (earlier 168434)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eOEM references are provided for identification; this listing is for GTE's rebuild service. Hose configuration and fittings must be confirmed against the supplied system and vehicle assembly number. The new GTE hose set is not represented as a new Ferrari OEM kit.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003ch2\u003eWhat the full system rebuild includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eF1 actuator rebuild.\u003c\/li\u003e\n\u003cli\u003eHydraulic power unit rebuild.\u003c\/li\u003e\n\u003cli\u003eComplete new hydraulic hose set; your original hose set must be sent in with the actuator and power unit.\u003c\/li\u003e\n\u003cli\u003eNew hydraulic accumulator.\u003c\/li\u003e\n\u003cli\u003eBrand-new electric pump motor.\u003c\/li\u003e\n\u003cli\u003eReplacement of all seals within the serviced actuator and power unit.\u003c\/li\u003e\n\u003cli\u003eCleaning and refurbishment of the system components.\u003c\/li\u003e\n\u003cli\u003eTesting of all electrovalves and the existing potentiometers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePotentiometers and electrovalves\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePotentiometers are tested, but their rebuild or replacement is not included in the listed service.\u003c\/strong\u003e Any issue identified during testing will be discussed with the customer.\u003c\/p\u003e\n\u003cp\u003eAll electrovalves are tested. If an electrovalve requires replacement, GTE will inform the customer of the \u003cstrong\u003eadditional parts cost for approval before replacement\u003c\/strong\u003e. There is \u003cstrong\u003eno additional labor charge for electrovalve replacement performed as part of this system rebuild\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eSend the complete system, including the hoses\u003c\/h2\u003e\n\u003cp\u003eBecause of the unique configuration of this F355 F1-HL assembly, \u003cstrong\u003ethe complete system, including the F1 actuator, hydraulic power unit and original hose set, must be sent to GTE Engineering for rebuilding\u003c\/strong\u003e. Contact us before shipping so we can confirm the required components, packing arrangements and current receiving address.\u003c\/p\u003e\n\u003cp\u003eThis is a rebuild of the customer's supplied hydraulic system. It is not a complete mechanical transmission or clutch rebuild.\u003c\/p\u003e\n\u003ch2\u003eRecommended TCU upgrade — inquire before ordering\u003c\/h2\u003e\n\u003cp\u003eGTE Engineering strongly recommends discussing an upgraded \u003cstrong\u003etransmission control unit (TCU)\u003c\/strong\u003e for the Ferrari F355 F1, particularly given the age of the original electronics. Suitable TCUs are extremely difficult to source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated TCU price: approximately $5,800 USD, if available.\u003c\/strong\u003e The TCU is optional, sold separately and \u003cstrong\u003enot included in the listed hydraulic system rebuild\u003c\/strong\u003e. Contact GTE to confirm availability, current pricing and service scope; have your dealer or qualified installer verify suitability for your car and installation or setup requirements before making arrangements.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/zh\/pages\/contact-us\"\u003e\u003cstrong\u003eContact GTE about the F355 F1 rebuild and TCU availability\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eRelated information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 and E-Gear system rebuild guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eRebuild and product guide index\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63178473308241,"sku":"89350156763671","price":12850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/175834-ferrari-f355-f1-hydraulic-system-actuator-power-unit-hoses-gte.png?v=1793405256"},{"product_id":"ferrari-575-hydraulic-hose-set-rebuild","title":"Ferrari 575M \/ Superamerica F1 Hydraulic Hose Set Rebuild (2002–2006)","description":"\u003ch2\u003eFerrari 575M \/ Superamerica F1 Hydraulic Hose Set Rebuild (2002–2006)\u003c\/h2\u003e\u003cp\u003eGTE Engineering rebuilds hydraulic hose sets in-house for the Ferrari 575M \/ Superamerica F1. Send your original full set, retaining its position identification, for sizing and reuse of the appropriate special fittings.\u003c\/p\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003e575M Maranello and Superamerica with F1 transmission only; excludes gated manual cars.\u003c\/p\u003e\u003cp\u003eYear range: 2002–2006. Model year alone does not establish compatibility.\u003c\/p\u003e\u003ch3\u003eGear-selection hose references\u003c\/h3\u003e\u003cp\u003eCatalog reference: 575 Superamerica F1 clutch hydraulic control diagram 042. Verify the installed set and any model-specific differences.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEV1: 185087 — diagram item 12\u003c\/li\u003e\n\u003cli\u003eEV2: 185088 — diagram item 13\u003c\/li\u003e\n\u003cli\u003eEV3: 185089 — diagram item 14\u003c\/li\u003e\n\u003cli\u003eEV4: 185090 — diagram item 15\u003c\/li\u003e\n\u003cli\u003eEV5: 185091 — diagram item 16\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe five EV1–EV5 lines form the gear-selection set. Clutch (EVF), pump delivery and return lines are separate circuits; their inclusion must be agreed against the original set. Actuator, power unit, fluid, loose heat sleeves and installation hardware are not included in this hose-only offering.\u003c\/p\u003e\u003cp\u003eOEM part numbers are application references for identification. GTE Engineering performs the hose-set rebuild; this is not a genuine manufacturer-supplied hose kit.\u003c\/p\u003e\u003ch3\u003ePictures\u003c\/h3\u003e\u003cp class=\"gte-hose-gallery-note\"\u003e\u003cstrong\u003eGallery:\u003c\/strong\u003e These representative GTE Engineering hose photographs show our workmanship. They are not model-specific photographs; hose lengths, fittings and quantities vary by application.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e · \u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e\u003c\/p\u003e\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct components before ordering or sending parts. GTE Engineering does not provide VIN-to-part checks.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63345587028049,"sku":"90461734036973","price":1380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/gte-hydraulic-hose-set-01-overview.png?v=1793352707"},{"product_id":"ferrari-enzo-hydraulic-hose-set-rebuild","title":"Ferrari Enzo F1 Hydraulic Hose Set Rebuild (2002–2004)","description":"\u003ch2\u003eFerrari Enzo F1 Hydraulic Hose Set Rebuild (2002–2004)\u003c\/h2\u003e\u003cp\u003eGTE Engineering rebuilds hydraulic hose sets in-house for the Ferrari Enzo F1. Send your original full set, retaining its position identification, for sizing and reuse of the appropriate special fittings.\u003c\/p\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eFerrari Enzo F1 gearbox hydraulic gear-selection circuits. These five catalog references also appear in the Maserati MC12 catalog; use the original set to establish lengths and fitting orientation.\u003c\/p\u003e\u003cp\u003eYear range: 2002–2004. Model year alone does not establish compatibility.\u003c\/p\u003e\u003ch3\u003eGear-selection hose references\u003c\/h3\u003e\u003cp\u003eCatalog reference: Ferrari Enzo F1 clutch hydraulic control diagram 022. Verify the installed set and any model-specific differences.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEV1: 189767 — diagram item 21\u003c\/li\u003e\n\u003cli\u003eEV2: 189768 — diagram item 22\u003c\/li\u003e\n\u003cli\u003eEV3: 189769 — diagram item 23\u003c\/li\u003e\n\u003cli\u003eEV4: 189771 — diagram item 24\u003c\/li\u003e\n\u003cli\u003eEV5: 189772 — diagram item 25\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe five EV1–EV5 lines form the gear-selection set. Clutch (EVF), pump delivery and return lines are separate circuits; their inclusion must be agreed against the original set. Actuator, power unit, fluid, loose heat sleeves and installation hardware are not included in this hose-only offering.\u003c\/p\u003e\u003cp\u003eOEM part numbers are application references for identification. GTE Engineering performs the hose-set rebuild; this is not a genuine manufacturer-supplied hose kit.\u003c\/p\u003e\u003ch3\u003ePictures\u003c\/h3\u003e\u003cp class=\"gte-hose-gallery-note\"\u003e\u003cstrong\u003eGallery:\u003c\/strong\u003e These representative GTE Engineering hose photographs show our workmanship. They are not model-specific photographs; hose lengths, fittings and quantities vary by application.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e · \u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e\u003c\/p\u003e\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct components before ordering or sending parts. GTE Engineering does not provide VIN-to-part checks.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Rebuild Service","offer_id":63482708459601,"sku":"90826850912290","price":1480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/gte-hydraulic-hose-set-01-overview.png?v=1793352707"},{"product_id":"maserati-mc12-hydraulic-hose-set-rebuild","title":"Maserati MC12 Cambiocorsa Hydraulic Hose Set Rebuild (2004–2005) 189767 \/ 189768 \/ 189769 \/ 189771 \/ 189772","description":"\u003ch2\u003eMaserati MC12 Cambiocorsa Hydraulic Hose Set Rebuild (2004–2005) 189767 \/ 189768 \/ 189769 \/ 189771 \/ 189772\u003c\/h2\u003e\n\u003cp\u003eGTE Engineering rebuilds hydraulic hose sets in-house for the Maserati MC12 Cambiocorsa. Send your original full set, retaining its position identification, for sizing and reuse of the appropriate special fittings.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eMaserati MC12 road-car Cambiocorsa gearbox. Excludes MC20 and other modern DCT applications. The five EV1–EV5 catalog references match the Ferrari Enzo.\u003c\/p\u003e\n\u003cp\u003eYear range: 2004–2005. Model year alone does not establish compatibility.\u003c\/p\u003e\n\u003ch3\u003eGear-selection hose references\u003c\/h3\u003e\n\u003cp\u003eCatalog reference: Maserati MC12 F1 clutch hydraulic control diagram 0023. Verify the installed set and any model-specific differences.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEV1: 189767 — diagram item 21\u003c\/li\u003e\n\u003cli\u003eEV2: 189768 — diagram item 22\u003c\/li\u003e\n\u003cli\u003eEV3: 189769 — diagram item 23\u003c\/li\u003e\n\u003cli\u003eEV4: 189771 — diagram item 24\u003c\/li\u003e\n\u003cli\u003eEV5: 189772 — diagram item 25\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe five EV1–EV5 lines form the gear-selection set. Clutch (EVF), pump delivery and return lines are separate circuits; their inclusion must be agreed against the original set. Actuator, power unit, fluid, loose heat sleeves and installation hardware are not included in this hose-only offering.\u003c\/p\u003e\n\u003cp\u003eOEM part numbers are application references for identification. GTE Engineering performs the hose-set rebuild; this is not a genuine manufacturer-supplied hose kit.\u003c\/p\u003e\n\u003ch3\u003ePictures\u003c\/h3\u003e\n\u003cp class=\"gte-hose-gallery-note\"\u003e\u003cstrong\u003eGallery:\u003c\/strong\u003e These representative GTE Engineering hose photographs show our workmanship. They are not model-specific photographs; hose lengths, fittings and quantities vary by application.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e · \u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct components before ordering or sending parts. GTE Engineering does not provide VIN-to-part checks.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63345587257425,"sku":"90959054088460","price":980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/maserati-hydraulic-hose-set-coiled-overview.png?v=1793356513"},{"product_id":"lamborghini-murcielago-hydraulic-hose-set-086325107a-086325095a-086325097a-086325163a-086325165a","title":"Lamborghini Murcielago and LP640 E-Gear Hydraulic Hose Set (2004–2010)","description":"\u003ch2\u003eLamborghini Murcielago E-Gear Hydraulic Hose Set Rebuild (2004–2010) 086325107A \/ 086325095A \/ 086325097A \/ 086325163A \/ 086325165A\u003c\/h2\u003e\n\u003cp\u003eGTE Engineering rebuilds hydraulic hose sets in-house for the Lamborghini Murcielago E-Gear. Send your original full set, retaining its position identification, for sizing and reuse of the appropriate special fittings.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eMurcielago E-Gear applications only; excludes gated manual transmissions. The EV1–EV5 references appear in the early Murcielago, LP640 and LP670 catalogs. Match the installed hoses and routing to the original set.\u003c\/p\u003e\n\u003cp\u003eYear range: 2004–2010. Model year alone does not establish compatibility.\u003c\/p\u003e\n\u003ch3\u003eGear-selection hose references\u003c\/h3\u003e\n\u003cp\u003eCatalog reference: Murciélago LP670 E-Gear valves group diagram 325.02.00. Verify the installed set and any model-specific differences.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEV1: 086325107A — diagram item 4\u003c\/li\u003e\n\u003cli\u003eEV2: 086325095A — diagram item 2\u003c\/li\u003e\n\u003cli\u003eEV3: 086325097A — diagram item 3\u003c\/li\u003e\n\u003cli\u003eEV4: 086325163A — diagram item 5\u003c\/li\u003e\n\u003cli\u003eEV5: 086325165A — diagram item 6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe five EV1–EV5 lines form the gear-selection set. Clutch (EVF), pump delivery and return lines are separate circuits; their inclusion must be agreed against the original set. Actuator, power unit, fluid, loose heat sleeves and installation hardware are not included in this hose-only offering.\u003c\/p\u003e\n\u003cp\u003eOEM part numbers are application references for identification. GTE Engineering performs the hose-set rebuild; this is not a genuine manufacturer-supplied hose kit.\u003c\/p\u003e\n\u003ch3\u003ePictures\u003c\/h3\u003e\n\u003cp\u003eRepresentative hose layout and shared GTE workmanship close-ups; these images do not show model-specific lengths, quantities or fitting orientations.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e · \u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility:\u003c\/strong\u003e The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct components before ordering or sending parts. GTE Engineering does not provide VIN-to-part checks.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63345587486801,"sku":"91072574632125","price":1480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/ferrari-360-f1-hose-set-overview_d0693b96-0c2b-4844-b763-42c99a1da859.png?v=1793332366"},{"product_id":"ferrari-360-enzo-f1-actuator-rebuild-181160","title":"Ferrari 360 Modena F1 \u0026 Ferrari Enzo F1s Actuator Rebuild – 181160","description":"\u003cp\u003eChoose the service that matches your vehicle. The Ferrari 360 Modena F1 actuator rebuild and the Ferrari Enzo F1-S (Superfast) conversion are different services and are not interchangeable. Catalog reference 181160 identifies the original actuator application; it does not identify the complete custom Enzo conversion package. Your installer must match the installed assembly, transmission and configuration before ordering.\u003c\/p\u003e\n\u003ch2\u003e360 Modena F1: actuator rebuild\u003c\/h2\u003e\n\u003cp\u003eSend your original hydraulic shift actuator for inspection. The rebuild service includes disassembly, cleaning, inspection, seal attention, reassembly and appropriate bench checks. Damaged components and work outside the agreed scope require a separate estimate. Vehicle installation, bleeding, fluid and other assemblies are separate unless agreed. The Enzo Superfast conversion described below is not included in the 360 Modena F1 option.\u003c\/p\u003e\n\u003ch2\u003eFerrari Enzo F1s: custom F1-S (Superfast) conversion\u003c\/h2\u003e\n\u003cp\u003eGTE Engineering custom-builds the Enzo Superfast actuator using a Ferrari F430 Scuderia-based setup adapted to the Enzo. This converts the original F1 arrangement to GTE's F1-S (Superfast) configuration rather than simply rebuilding the standard Enzo actuator.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated shift-time improvement:\u003c\/strong\u003e GTE estimates a reduction of approximately 60–100 milliseconds in shift time compared with the original F1 setup. This is an estimated improvement, not the total shift time or a guaranteed result; the actual improvement depends on the vehicle, system condition and completed installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequired complementary work:\u003c\/strong\u003e The conversion requires work on the complete hydraulic power unit, new hydraulic hoses and additional conversion work. These requirements must be covered in an agreed, vehicle-specific scope before ordering. Their inclusion in the selected actuator price must not be assumed; confirm the complete package, supplied components and any additional charges with GTE Engineering.\u003c\/p\u003e\n\u003cp\u003eTurnaround depends on condition and workshop workload. \u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e · \u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 system guide\u003c\/a\u003e · \u003ca href=\"\/zh\/pages\/warranty\"\u003eWarranty coverage\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003ePart selection is the customer’s or installer’s responsibility; GTE does not provide VIN-to-part confirmation.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"360 Modena F1","offer_id":63475486556241,"sku":"91393738039055","price":4800.0,"currency_code":"USD","in_stock":true},{"title":"Ferrari Enzo F1s","offer_id":63475486589009,"sku":"91393738039056","price":43400.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/gte-181160-f1-powershift-installed-tiled-workshop.png?v=1794343298"},{"product_id":"ferrari-599-612-f1-power-unit-rebuild-248412","title":"Ferrari 599 \u0026 612 F1 Power Unit Rebuild – 248412","description":"\u003cp\u003eGTE Engineering service for the customer-supplied hydraulic power unit on applicable Ferrari 599 and 612 F1 systems. Catalog reference 248412. Your installer must match the installed assembly, transmission and configuration before ordering.\u003c\/p\u003e\n\u003cp\u003eSend the original unit for inspection. Service includes disassembly, cleaning, inspection, seal attention, reassembly, and appropriate bench checks. Damaged components and work outside the agreed scope require a separate estimate. Vehicle installation, bleeding, fluid, and other assemblies are separate unless agreed.\u003c\/p\u003e\n\u003cp\u003eTurnaround depends on condition and workshop workload. \u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e · \u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 system guide\u003c\/a\u003e · \u003ca href=\"\/zh\/pages\/warranty\"\u003eWarranty coverage\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003ePart selection is the customer’s or installer's responsibility; GTE does not provide VIN-to-part confirmation.\u003c\/p\u003e\n\u003cp\u003ePricing and exact service scope require confirmation before publication.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63386266337361,"sku":"91790705860872","price":1650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/maserati-mc12-179533-hydraulic-power-unit-gte.png?v=1794209478"},{"product_id":"aston-martin-v8-vantage-sportshift-actuator-rebuild","title":"Aston Martin Sportshift II \u0026 III Shift Actuator Rebuild – BG33-7K444-AA","description":"\u003cp\u003eGTE Engineering rebuilds the original shift actuator you send from an Aston Martin with the matching ASM system.\u003c\/p\u003e\u003ch2\u003eParts and service details\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVIN and build applicability\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eV8 Vantage with seven-speed Sportshift II from 12.25MY.\u003c\/li\u003e\n\u003cli\u003eV8 Vantage S with seven-speed Sportshift II from 11MY.\u003c\/li\u003e\n\u003cli\u003eVantage GT8 Sportshift II and V12 Vantage S Sportshift III with the cataloged actuator kit BG33-7K444-AA.\u003c\/li\u003e\n\u003cli\u003eConfirm the full VIN, seven-speed gearbox and fitted actuator part number.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalog references\u003c\/th\u003e\n\u003ctd\u003eBG33-7K444-AA is actuator kit A. BG33-7C391-AB and BG33-7C391-AD identify broader Sportshift assemblies. The service covers your original shift actuator.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorkshop scope\u003c\/th\u003e\n\u003ctd\u003eDisassembly, inspection, cleaning, replacement of applicable internal seals, reassembly and bench checks for leakage and actuator operation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeparate work and parts\u003c\/th\u003e\n\u003ctd\u003eHydraulic power-unit service, hoses and fluid can be quoted separately. Vehicle installation, bleeding and calibration can be arranged at GTE.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalog model years\u003c\/th\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eV8 Vantage (2012–2018)\u003c\/li\u003e\n\u003cli\u003eV8 Vantage S (2011–2018)\u003c\/li\u003e\n\u003cli\u003eVantage GT8 (2017)\u003c\/li\u003e\n\u003cli\u003eV12 Vantage S (2013–2018)\u003c\/li\u003e\n\u003c\/ul\u003eConfirm transmission generation and installed part. See the application details for VIN and model-year breaks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDiagram identification\u003c\/th\u003e\n\u003ctd\u003e070300-R2A.1 #1. GT8 070300-R2A-2 #1. V12S 070300-01.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eSend your original actuator after the scope is agreed. Include a photo of the original label and connectors, your vehicle details and any diagnostic findings. Cracks, severe damage or prior repairs may need a separate estimate. Turnaround depends on condition and workshop workload.\u003c\/p\u003e\u003ch3\u003eGallery\u003c\/h3\u003e\u003cp\u003eThe GTE workshop photos show a 2012 V8 Vantage Sportshift repair and illustrate component location and service scope. Identify your installed part before ordering.\u003c\/p\u003e\u003csection class=\"gte-product-guides\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/aston-martin-asm-sportshift-rebuild\"\u003eAston Martin Sportshift (ASM) Rebuild Service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/warranty\"\u003eRebuild warranty and coverage\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-related-guides\"\u003e\u003ch3\u003eRelated technical guides\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-egear-rebuilding\"\u003eAutomated Manual Systems: Diagnosis \u0026amp; Rebuild Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/glossary\"\u003eTechnical Glossary\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility.\u003c\/strong\u003e The customer or sender verifies the original part number, installed transmission and vehicle compatibility before ordering or shipping any component.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63386323222609,"sku":"91993389086412","price":1600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/gte-aston-vantage-asm-actuator-detail-cleaned-v2.png?v=1793903933"},{"product_id":"aston-martin-v8-vantage-sportshift-hydraulic-power-unit-rebuild","title":"Aston Martin Sportshift II \u0026 III Hydraulic Power Unit Rebuild – BG33-5F498-AA","description":"\u003cp\u003eGTE Engineering rebuilds the original hydraulic control unit you send from an Aston Martin with the matching ASM system.\u003c\/p\u003e\u003ch2\u003eParts and service details\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVIN and build applicability\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eV8 Vantage with seven-speed Sportshift II from 12.25MY.\u003c\/li\u003e\n\u003cli\u003eV8 Vantage S with seven-speed Sportshift II from 11MY.\u003c\/li\u003e\n\u003cli\u003eVantage GT8 Sportshift II and V12 Vantage S Sportshift III with the cataloged valve block BG33-5F498-AA.\u003c\/li\u003e\n\u003cli\u003eConfirm the full VIN, seven-speed gearbox and fitted valve block and hydraulic connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalog references\u003c\/th\u003e\n\u003ctd\u003eBG33-5F498-AA is valve-block kit H. BG33-7A103-AA is electric pump kit E. Match the valve block, connections and installed pump when sending the power unit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorkshop scope\u003c\/th\u003e\n\u003ctd\u003eDisassembly and cleaning of the original valve block, inspection of valves and sealing surfaces, replacement of applicable seals, reassembly and hydraulic bench checks appropriate to the unit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeparate work and parts\u003c\/th\u003e\n\u003ctd\u003eThe complete hydraulic-service quote includes a new matched pump and accumulator. The shift actuator, hoses, fluid and vehicle installation or calibration can be quoted separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalog model years\u003c\/th\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eV8 Vantage (2012–2018)\u003c\/li\u003e\n\u003cli\u003eV8 Vantage S (2011–2018)\u003c\/li\u003e\n\u003cli\u003eVantage GT8 (2017)\u003c\/li\u003e\n\u003cli\u003eV12 Vantage S (2013–2018)\u003c\/li\u003e\n\u003c\/ul\u003eConfirm transmission generation and installed part. See the application details for VIN and model-year breaks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDiagram identification\u003c\/th\u003e\n\u003ctd\u003e070300-R2A.1 #7 valve block, #4 pump. GT8 same callouts. V12S 070300-01.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eSend your original hydraulic assembly after the scope is agreed. Include a photo of the original label and connectors, your vehicle details and any diagnostic findings. Cracks, severe damage or prior repairs may need a separate estimate. Turnaround depends on condition and workshop workload.\u003c\/p\u003e\u003ch3\u003eGallery\u003c\/h3\u003e\u003cp\u003eThe GTE workshop photos show a 2012 V8 Vantage Sportshift repair and illustrate component location and service scope. Identify your installed part before ordering.\u003c\/p\u003e\u003csection class=\"gte-product-guides\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/aston-martin-asm-sportshift-rebuild\"\u003eAston Martin Sportshift (ASM) Rebuild Service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/warranty\"\u003eRebuild warranty and coverage\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-related-guides\"\u003e\u003ch3\u003eRelated technical guides\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-egear-rebuilding\"\u003eAutomated Manual Systems: Diagnosis \u0026amp; Rebuild Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/glossary\"\u003eTechnical Glossary\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility.\u003c\/strong\u003e The customer or sender verifies the original part number, installed transmission and vehicle compatibility before ordering or shipping any component.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63386324369489,"sku":"92019789924199","price":2050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/gte-aston-vantage-asm-power-unit-actuator-cleaned-v2.png?v=1793903949"},{"product_id":"lamborghini-murcielago-e-gear-actuator-rebuild-086398270","title":"Lamborghini Murciélago E-Gear Actuator Rebuild  086398270","description":"\u003cp\u003eSend-in rebuild service for the customer-supplied Lamborghini Murciélago E-Gear shift actuator PN: 086398270. Match the installed unit and transmission configuration before ordering.\u003c\/p\u003e\n\u003cp\u003eInspection determines condition, required repairs and testing. Contact GTE before ordering to confirm the service inclusions, replacement components, final pricing, warranty and turnaround for your unit. Installation, bleeding and other components are separate unless agreed.\u003c\/p\u003e\n\u003cp\u003eCustomer or installer is responsible for selecting the correct part. \u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e · \u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eRebuild guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reference:\u003c\/strong\u003e 086325081H is listed as the E-Gear unit assembly in the Murciélago LP670 diagram. Other Murciélago versions require separate identification.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63386325254225,"sku":"92127864103592","price":3640.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/lamborghini-murcielago-egear-actuator-cover-gte.png?v=1794515266"},{"product_id":"lamborghini-murcielago-e-gear-power-unit-rebuild","title":"Lamborghini Murciélago E-Gear Power Unit Rebuild","description":"\u003cp\u003eSend-in rebuild service for your Lamborghini Murciélago E-Gear hydraulic power unit. This service is for your existing unit, not the purchase of a new replacement assembly.\u003c\/p\u003e\u003ch2\u003eIncluded in the power unit rebuild\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRebuild of your customer-supplied E-Gear hydraulic power unit.\u003c\/li\u003e\n\u003cli\u003eNew aftermarket hydraulic motor\/pump.\u003c\/li\u003e\n\u003cli\u003eNew aftermarket accumulator.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe replacement hydraulic motor\/pump and accumulator are aftermarket products, not genuine Lamborghini-supplied components.\u003c\/p\u003e\u003ch2\u003eHydraulic motor\/pump reference: 086398317\u003c\/h2\u003e\u003cp\u003eOEM reference 086398317 identifies the hydraulic motor\/pump application. It is provided for component identification, not as the part number of the complete power unit or as a claim that the included replacement pump is a genuine OEM product.\u003c\/p\u003e\u003ch2\u003eService and compatibility\u003c\/h2\u003e\u003cp\u003eYour unit is inspected to determine its condition, required repairs and testing. Contact GTE Engineering to confirm any additional work, warranty and turnaround for your unit before ordering. Match the installed unit and transmission configuration; the customer or installer is responsible for confirming the correct application.\u003c\/p\u003e\u003cp\u003eInstallation, system bleeding and work on other components are separate unless specifically agreed.\u003c\/p\u003e\u003ch2\u003eSending your unit to GTE\u003c\/h2\u003e\u003cp\u003eReview our \u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eshipping instructions\u003c\/a\u003e before sending your unit and our \u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 and E-Gear rebuild guide\u003c\/a\u003e for additional information.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63386326073425,"sku":"92224717450872","price":2650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/lamborghini-murcielago-egear-power-unit-gte.png?v=1794515326"},{"product_id":"ferrari-f355-f1-actuator-rebuild-177687-167950","title":"Ferrari F355 F1 Actuator Rebuild – 177687 \/ 167950","description":"\u003cp\u003eCustomer-supplied Ferrari F355 F1 actuator rebuild service. Match catalog references 177687 \/ 167950 to the installed unit and configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eActuator rebuild price: $5,800 USD. Sensors, also called potentiometers, are not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis component service is separate from GTE’s complete F355 F1-HL system rebuild. Contact GTE before ordering to confirm the detailed work scope, testing, other included components, and turnaround for your unit.\u003c\/p\u003e\n\u003cp\u003eCustomer or installer must verify compatibility. \u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 system guide\u003c\/a\u003e · \u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63386502856785,"sku":"92799809972589","price":5800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/ferrari-f355-f1-actuator-rebuild-front-gte.png?v=1794515367"},{"product_id":"ferrari-f355-f1-hydraulic-hose-set-send-in-service","title":"Ferrari F355 F1 Complete 7-Line Actuator \u0026 Clutch Hydraulic Hose Set Rebuild","description":"\u003cp\u003eGTE Engineering makes a complete seven-line hydraulic hose set for the Ferrari F355 equipped with the F1 automated manual transmission: \u003cstrong\u003efive actuator lines and two clutch lines.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eOriginal hose set required\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eYou must send all seven original hoses with their fittings to GTE Engineering before the replacement set can be made.\u003c\/strong\u003e The F355 system uses special banjo fittings, and we reuse certain fittings from your original hoses. Contact GTE for current shipping and packing instructions before sending the set.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive actuator hydraulic lines:\u003c\/strong\u003e EV1–EV5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo clutch hydraulic lines:\u003c\/strong\u003e pump to block and block to gearbox.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePhoto note:\u003c\/strong\u003e The F355 overview and related detail photos show the five actuator lines. Additional close-ups show GTE Engineering workmanship on other hose sets. The two additional clutch hydraulic lines are included in the seven-line service but are not shown in the hose photographs.\u003c\/p\u003e\n\u003ch3\u003eFerrari part number and diagram references\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e168466 — actuator line EV1 — diagram item 26\u003c\/li\u003e\n\u003cli\u003e168468 — actuator line EV2 — diagram item 25\u003c\/li\u003e\n\u003cli\u003e168470 — actuator line EV3 — diagram item 23\u003c\/li\u003e\n\u003cli\u003e168472 — actuator line EV4 — diagram item 22\u003c\/li\u003e\n\u003cli\u003e168474 — actuator line EV5 — diagram item 24\u003c\/li\u003e\n\u003cli\u003e175833 — pump to block — diagram item 31\u003c\/li\u003e\n\u003cli\u003e174421 — block to gearbox — diagram item 43\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart numbers are for identification; the replacement set is made by GTE and is not a new genuine Ferrari OEM kit. The customer or installing workshop should verify the original lines and application before ordering.\u003c\/p\u003e\n\u003ch3\u003eTurnaround time\u003c\/h3\u003e\n\u003cp\u003eApproximately 2–3 days after GTE receives the original hose set. Shipping time is additional.\u003c\/p\u003e\n\u003ch3\u003eApplication and installation\u003c\/h3\u003e\n\u003cp\u003eFerrari F355 \/ 355 F1 with 5.2 Motronic and the F1 electrohydraulic transmission. The F1 configuration is required. Hose fittings and configuration should be checked against the original parts; the factory diagram identifies a change at assembly number 27649. Installation, hydraulic bleeding, and any required setup should be carried out by a qualified technician. The actuator, hydraulic power unit, and other components are not included.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eImages are illustrative; fitting details and hose configuration should be checked against the original set.\u003c\/em\u003e\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63392578338897,"sku":"93140958706485","price":1080.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/ferrari-f355-f1-hydraulic-hose-set.png?v=1793711351"},{"product_id":"aston-martin-v8-vantage-sportshift-i-actuator-rebuild-6g33-7c372-aa","title":"Aston Martin V8 Vantage Sportshift I Shift Actuator Rebuild – 6G33-7C372-AA","description":"\u003cp\u003eSend your original six-speed Sportshift I shift actuator to GTE Engineering for rebuilding. Aston Martin reference 6G33-7C372-AA identifies the shifter-cover service kit for the applicable V8 Vantage actuator.\u003c\/p\u003e\u003ch2\u003eParts and service details\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVIN and build applicability\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eFor V8 Vantage Coupe and Roadster with the factory six-speed Sportshift I (ASM) transmission and matching shift actuator.\u003c\/li\u003e\n\u003cli\u003eFor 2012 cars, verify the installed gearbox and original actuator against the full VIN before shipping. The six-speed application ends at the 2012.25MY changeover.\u003c\/li\u003e\n\u003cli\u003eFor complete six-speed transmission kits, diagram 070300-R2 lists 6G33-7C391-AE up to VIN suffix C15848 and BG33-7C391-BA from C15848. Check the full VIN and installed kit fittings at the changeover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalog references\u003c\/th\u003e\n\u003ctd\u003e6G33-7C372-AA is the shifter-cover service kit for the original shift actuator. 6G33-7C391-AE and BG33-7C391-BA are broader Sportshift transmission kit references.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorkshop scope\u003c\/th\u003e\n\u003ctd\u003eDisassembly, inspection, cleaning, replacement of applicable internal seals, reassembly and bench checks for leakage and actuator operation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeparate work and parts\u003c\/th\u003e\n\u003ctd\u003eHydraulic power-unit service, hoses and fluid can be quoted separately. Vehicle installation, bleeding and calibration can be arranged at GTE.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVehicle fitment by model year\u003c\/th\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e2007–2008 model years · Aston Martin V8 Vantage 4.3L\u003c\/li\u003e\n\u003cli\u003e2009–2012 model years · Aston Martin V8 Vantage 4.7L, through the six-speed builds before 2012.25MY\u003c\/li\u003e\n\u003c\/ul\u003eBoth applications require the matching factory six-speed Sportshift I actuator.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDiagram identification\u003c\/th\u003e\n\u003ctd\u003e070300-R2A #1. 070300-R2 #7 for the broader kits.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eSend your original actuator after the scope is agreed. Include a photo of the original label and connectors, your vehicle details and any diagnostic findings. Cracks, severe damage or prior repairs may need a separate estimate. Turnaround depends on condition and workshop workload.\u003c\/p\u003e\u003ch3\u003eGallery\u003c\/h3\u003e\u003cp\u003eGTE workshop photos from a 2012 V8 Vantage Sportshift repair show the hydraulic components and their location. Identify your installed part before ordering.\u003c\/p\u003e\u003csection class=\"gte-product-guides\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/aston-martin-asm-sportshift-rebuild\"\u003eAston Martin Sportshift (ASM) Rebuild Service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/warranty\"\u003eRebuild warranty and coverage\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-related-guides\"\u003e\u003ch3\u003eRelated technical guides\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-egear-rebuilding\"\u003eAutomated Manual Systems: Diagnosis \u0026amp; Rebuild Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/glossary\"\u003eTechnical Glossary\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility.\u003c\/strong\u003e The customer or sender verifies the original part number, installed transmission and vehicle compatibility before ordering or shipping any component.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63436442206289,"sku":"93351493895164","price":1480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/gte-aston-vantage-asm-actuator-detail-cleaned-v2.png?v=1793903933"},{"product_id":"aston-martin-v8-vantage-sportshift-i-hydraulic-power-unit-rebuild-6g33-7f054-aa","title":"Aston Martin V8 Vantage Sportshift I Hydraulic Power Unit Rebuild – 6G33-7F054-AA","description":"\u003cp\u003eGTE Engineering rebuilds the original hydraulic control unit you send from an Aston Martin with the matching ASM system.\u003c\/p\u003e\u003ch2\u003eParts and service details\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVIN and build applicability\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eV8 Vantage 4.3L or 4.7L with factory six-speed Sportshift I up to the 12.25MY changeover. Check the actual gearbox on 2012 cars.\u003c\/li\u003e\n\u003cli\u003eMatch the full VIN and valve\/accumulator assembly 6G33-7F054-AA.\u003c\/li\u003e\n\u003cli\u003eFor complete V8 Vantage six-speed kits, catalog 070300-R2 lists 6G33-7C391-AE up to C15848 and BG33-7C391-BA from C15848. At C15848, check the installed kit and fittings by full VIN.\u003c\/li\u003e\n\u003cli\u003eThe six-speed clutch-fluid pipe changes from 6G33-7J327-AA through C15848 to BG33-7J327-AA from C15849. Check the fitted connector for prior replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalog references\u003c\/th\u003e\n\u003ctd\u003e6G33-7F054-AA is the valve and accumulator assembly. The separate six-speed pump kit is 6G33-7A103-AA.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorkshop scope\u003c\/th\u003e\n\u003ctd\u003eDisassembly and cleaning of the original valve block, inspection of valves and sealing surfaces, replacement of applicable seals, reassembly and hydraulic bench checks appropriate to the unit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeparate work and parts\u003c\/th\u003e\n\u003ctd\u003eThe complete hydraulic-service quote includes a new matched pump and accumulator. The shift actuator, hoses, fluid and vehicle installation or calibration can be quoted separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalog model years\u003c\/th\u003e\n\u003ctd\u003e\n\u003cul\u003e\u003cli\u003eV8 Vantage (2007–2012)\u003c\/li\u003e\u003c\/ul\u003eConfirm transmission generation and installed part. See the application details for VIN and model-year breaks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDiagram identification\u003c\/th\u003e\n\u003ctd\u003e070300-R2 #17. 070300-R2A #5 for pump.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eSend your original hydraulic assembly after the scope is agreed. Include a photo of the original label and connectors, your vehicle details and any diagnostic findings. Cracks, severe damage or prior repairs may need a separate estimate. Turnaround depends on condition and workshop workload.\u003c\/p\u003e\u003ch3\u003eGallery\u003c\/h3\u003e\u003cp\u003eGTE workshop photos from a 2012 V8 Vantage Sportshift repair show the hydraulic components and their location. Identify your installed part before ordering.\u003c\/p\u003e\u003csection class=\"gte-product-guides\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/aston-martin-asm-sportshift-rebuild\"\u003eAston Martin Sportshift (ASM) Rebuild Service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/warranty\"\u003eRebuild warranty and coverage\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-related-guides\"\u003e\u003ch3\u003eRelated technical guides\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-egear-rebuilding\"\u003eAutomated Manual Systems: Diagnosis \u0026amp; Rebuild Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/glossary\"\u003eTechnical Glossary\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility.\u003c\/strong\u003e The customer or sender verifies the original part number, installed transmission and vehicle compatibility before ordering or shipping any component.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63436442239057,"sku":"93431955974470","price":1850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/gte-aston-vantage-asm-power-unit-actuator-cleaned-v2.png?v=1793903949"},{"product_id":"aston-martin-vanquish-s-asm-actuator-rebuild-4r12-382671-aa","title":"Aston Martin Vanquish S ASM Power Unit \u0026 Actuator Rebuild - 4R12-382671-AA","description":"\u003cp\u003eGTE Engineering rebuild service for your original Aston Martin Vanquish S ASM power unit and actuator. The actuator is fully rebuilt, and all electrovalves in the power unit are tested and calibrated. The rebuild includes the hydraulic pump, pressure sensor and all seals. Confirm the fitted assembly and VIN before shipping.\u003c\/p\u003e\u003ch2\u003eParts and service details\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVIN and build applicability\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eFirst-generation Vanquish S from VIN ending 501506, inclusive, with ASM actuator\/manifold 4R12-382671-AA.\u003c\/li\u003e\n\u003cli\u003eFor Vanquish S through VIN ending 501505, check the installed 4R12-41-10718 assembly.\u003c\/li\u003e\n\u003cli\u003eSend the full VIN and a photo of the installed actuator\/manifold label. Confirm the fitted number if the unit has been replaced.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalog references\u003c\/th\u003e\n\u003ctd\u003e4R12-382671-AA is the actuator\/manifold assembly for the specified Vanquish S application. The earlier 4R12-41-10718 has a separate service listing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorkshop scope\u003c\/th\u003e\n\u003ctd\u003eFull actuator rebuild with disassembly, inspection, cleaning, reassembly and bench checks for leakage and actuator operation. All power unit electrovalves are tested and calibrated. The hydraulic pump, pressure sensor and all seals are included in the rebuild.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAdditional parts\u003c\/th\u003e\n\u003ctd\u003eIf additional parts are required, such as an accumulator, we will inform the customer.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalog model years\u003c\/th\u003e\n\u003ctd\u003e\n\u003cul\u003e\u003cli\u003eVanquish S (2004–2007)\u003c\/li\u003e\u003c\/ul\u003eConfirm transmission generation and installed part. See the application details for VIN and model-year breaks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDiagram identification\u003c\/th\u003e\n\u003ctd\u003e3.3 #1. Vanquish S VIN 501506 and later.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eSend your original power unit and actuator after the scope is agreed. Include a photo of the original label and connectors, your vehicle details and any diagnostic findings. Cracks, severe damage or prior repairs may need a separate estimate. Turnaround depends on condition and workshop workload.\u003c\/p\u003e\u003csection class=\"gte-product-guides\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/aston-martin-asm-sportshift-rebuild\"\u003eAston Martin Sportshift (ASM) Rebuild Service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/warranty\"\u003eRebuild warranty and coverage\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-related-guides\"\u003e\u003ch3\u003eRelated technical guides\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-egear-rebuilding\"\u003eAutomated Manual Systems: Diagnosis \u0026amp; Rebuild Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/glossary\"\u003eTechnical Glossary\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility.\u003c\/strong\u003e The customer or sender verifies the original part number, installed transmission and vehicle compatibility before ordering or shipping any component.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63436442271825,"sku":"93580170404410","price":4380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/gte-vanquish-s-asm-power-unit-actuator-rebuild-new-alloy.png?v=1794208449"},{"product_id":"aston-martin-one-77-v8-vantage-sportshift-actuator-kit-rebuild-6g33-7c391-ae","title":"Aston Martin One-77 Sportshift (ASM) Full Kit Rebuild Service 6G33-7C391-AE","description":"\u003cp\u003eGTE Engineering provides a full kit rebuild service for the Aston Martin One-77 Sportshift (ASM) system identified by kit reference 6G33-7C391-AE. The actuator is fully rebuilt, all seals and all sensors except the position sensor are replaced, and the entire system is tested.\u003c\/p\u003e\u003ch2\u003eParts and service details\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVIN and build applicability\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eOne-77 with factory six-speed Sportshift. Use One-77 catalog 07.0002A and kit reference 6G33-7C391-AE for identification.\u003c\/li\u003e\n\u003cli\u003eConfirm the full One-77 VIN and photos of the fitted actuator label before quoting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalog references\u003c\/th\u003e\n\u003ctd\u003e6G33-7C391-AE identifies the complete Sportshift transmission kit. This listing is for GTE Engineering’s full kit rebuild service. The kit number is a catalog reference for identification.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorkshop scope\u003c\/th\u003e\n\u003ctd\u003eFull kit rebuild, including a complete actuator rebuild, replacement of all seals and all sensors except the position sensor, and testing of the entire system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAccumulator and EV valves\u003c\/th\u003e\n\u003ctd\u003eThe accumulator and EV valves are tested. If testing shows that replacement is needed, we will inform the customer.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition sensor exclusion\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003ePosition sensor replacement is not included in the rebuild service.\u003c\/strong\u003e The position sensor is only replaced if a technician’s diagnosis confirms that replacement is required.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalog model years\u003c\/th\u003e\n\u003ctd\u003e\n\u003cul\u003e\u003cli\u003eOne-77 (2010–2012)\u003c\/li\u003e\u003c\/ul\u003eConfirm transmission generation and installed part. See the application details for VIN and model-year breaks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDiagram identification\u003c\/th\u003e\n\u003ctd\u003eCatalog 07.0002A item A identifies the shifter cover assembly within the parent kit at item 1. The rebuild service covers the full kit, not only the shifter cover assembly.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eSend your original Sportshift kit after the scope is agreed. Include a photo of the original label and connectors, your vehicle details and any diagnostic findings. Cracks, severe damage or prior repairs may need a separate estimate. Turnaround depends on condition and workshop workload.\u003c\/p\u003e\u003csection class=\"gte-product-guides\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/aston-martin-asm-sportshift-rebuild\"\u003eAston Martin Sportshift (ASM) Rebuild Service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/warranty\"\u003eRebuild warranty and coverage\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-related-guides\"\u003e\u003ch3\u003eRelated technical guides\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-egear-rebuilding\"\u003eAutomated Manual Systems: Diagnosis \u0026amp; Rebuild Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/glossary\"\u003eTechnical Glossary\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility.\u003c\/strong\u003e The customer or sender verifies the original part number, installed transmission and vehicle compatibility before ordering or shipping any component.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63436442337361,"sku":"93777607729563","price":4800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/gte-aston-vantage-asm-power-unit-actuator-cleaned-v2.png?v=1793903949"},{"product_id":"aston-martin-vanquish-asm-new-hydraulic-pump-kit-1r12-41-10689","title":"Aston Martin Vanquish ASM New Hydraulic Pump Kit – 1R12-41-10689","description":"\u003cp\u003eNew pump and motor kit for the matching first-generation Vanquish ASM installation. Reference 1R12-41-10689.\u003c\/p\u003e\u003ch2\u003eParts and fitment details\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVIN and build applicability\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eFirst-generation Vanquish or Vanquish S ASM with the configuration corresponding to pump kit 1R12-41-10689.\u003c\/li\u003e\n\u003cli\u003eCompare the original and retrofit pump\/motor configurations by installed label, motor connector, fittings and mounting.\u003c\/li\u003e\n\u003cli\u003eSend the full VIN and pump photos. Use VIN 501506 to identify the Vanquish S actuator\/manifold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalog references\u003c\/th\u003e\n\u003ctd\u003e1R12-41-10689 is a Vanquish ASM pump-kit reference. Compare the original pump and motor with the supplied configuration before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWhat is supplied\u003c\/th\u003e\n\u003ctd\u003eNew replacement pump and motor kit for the specified configuration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeparate work and parts\u003c\/th\u003e\n\u003ctd\u003eThe 1R12-380730-AB pump has a separate listing. Accumulator, installation and calibration are separate items.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalog model years\u003c\/th\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eVanquish (2001–2007)\u003c\/li\u003e\n\u003cli\u003eVanquish S (2004–2007)\u003c\/li\u003e\n\u003c\/ul\u003eConfirm transmission generation and installed part. See the application details for VIN and model-year breaks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDiagram identification\u003c\/th\u003e\n\u003ctd\u003eAston Martin catalog 3.3 item 14 identifies the pump kit. Verify the fitted pump and connector before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eUse the installed part label and compare the original connections before ordering. Ask for a quote for the exact configuration and availability.\u003c\/p\u003e\u003csection class=\"gte-product-guides\"\u003e\u003ch3\u003eLearn more about this product \u0026amp; system\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/aston-martin-asm-sportshift-rebuild\"\u003eAston Martin Sportshift (ASM) Rebuild Service\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/rebuild-product-information\"\u003eBrowse all rebuild \u0026amp; product guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-product-next-steps\"\u003e\u003ch3\u003eProduct help and next steps\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/zh\/pages\/request-a-quote\"\u003eAsk GTE about this product or service\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"gte-related-guides\"\u003e\u003ch3\u003eRelated technical guides\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/f1-egear-rebuilding\"\u003eAutomated Manual Systems: Diagnosis \u0026amp; Rebuild Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/pages\/glossary\"\u003eTechnical Glossary\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cp class=\"gte-part-responsibility\"\u003e\u003cstrong\u003ePart selection responsibility.\u003c\/strong\u003e The customer or sender verifies the original part number, installed transmission and vehicle compatibility before ordering or shipping any component.\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63436442566737,"sku":"94289091791971","price":550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/86076D71-CBF9-4461-A81C-A79584962841.png?v=1794031770"},{"product_id":"lamborghini-murcielago-e-gear-system-rebuild-249900015","title":"Lamborghini Murciélago Full E-Gear System Rebuild – 249900015","description":"\u003ch2\u003eLamborghini Murciélago Full E-Gear System Rebuild\u003c\/h2\u003e\n\u003cp\u003eGTE Engineering provides a full rebuild service for the customer-supplied Lamborghini Murciélago E-Gear hydraulic system. The package includes an actuator rebuild, full hydraulic power unit diagnostics, a new accumulator, a new hydraulic pump motor, and a complete five-line hydraulic hose set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem reference:\u003c\/strong\u003e 249900015. Confirm the vehicle application and installed E-Gear assemblies with GTE Engineering before ordering.\u003c\/p\u003e\n\u003ch3\u003eIncluded in the rebuild package\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRebuild of the customer-supplied E-Gear actuator.\u003c\/li\u003e\n\u003cli\u003eNew hydraulic pressure accumulator.\u003c\/li\u003e\n\u003cli\u003eNew electric motor for the E-Gear hydraulic pump.\u003c\/li\u003e\n\u003cli\u003eComplete hydraulic hose set consisting of five lines.\u003c\/li\u003e\n\u003cli\u003eFull diagnostic evaluation of the E-Gear hydraulic power unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional components, if required\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eReplacement electrovalves (solenoid valves), the hydraulic pressure sensor, the transmission itself, and potentiometers are additional-cost items and are not included in the base package.\u003c\/strong\u003e Any required replacements are quoted separately for customer approval.\u003c\/p\u003e\n\u003ch3\u003eSend-in service and installation\u003c\/h3\u003e\n\u003cp\u003eThis service rebuilds the customer's existing E-Gear system. Contact GTE Engineering to confirm the application and shipping arrangements before sending the components.\u003c\/p\u003e\n\u003cp\u003eVehicle removal and installation, hydraulic bleeding, and on-car calibration are separate from this send-in rebuild package unless specifically included in an agreed quotation. The installing workshop must complete the required bleeding, calibration, and system checks before returning the vehicle to service.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/zh\/pages\/shipping-instructions\"\u003eShipping instructions\u003c\/a\u003e · \u003ca href=\"\/zh\/pages\/f1-and-e-gear-rebuild\"\u003eF1 and E-Gear rebuild preparation guide\u003c\/a\u003e\u003c\/p\u003e","brand":"GTE Engineering","offers":[{"title":"Default Title","offer_id":63530320789585,"sku":"92127864103598","price":9240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/5546\/0689\/files\/lamborghini-murcielago-egear-actuator-power-unit-gte.png?v=1794515335"}],"url":"https:\/\/www.gte-engineering.com\/zh\/collections\/selespeed.oembed?page=2","provider":"GTE Engineering","version":"1.0","type":"link"}