Ferrari FF – GTC4Lusso Transmission Rebuild

GTE Engineering

Ferrari FF –
GTC4Lusso
Transmission Rebuild

From fault diagnosis to internal repair and final calibration: a closer look at the work behind returning an FF to the road.

GTE Engineering rebuilt 7DCL750 transmission service example, clutch housing view
VehicleFerrari FF
SystemDual-clutch transmission
WorkDiagnosis & rebuild
ResultShifting restored

Finding the cause
behind the codes.

This Ferrari FF arrived with multiple transmission fault codes, shifting issues, and an oil leak. An extensive diagnosis pointed toward a speed sensor concern, calling for a closer look inside the dual-clutch transmission.

Our goal was to identify the cause, address the leak and restore reliable operation through careful inspection, repair and calibration.

Ferrari FF DCT speed sensor fault codes.

Speed sensor faults can affect shift operation and generate transmission warnings. A diagnostic scan is the starting point for identifying the cause.

Examples of gearbox speed sensor codes listed by Ferrari for the FF and other covered models include:

Code Speed signal description
P0792 Even shaft speed signal invalid
P0794 Even shaft speed signal missing
P2746 Odd shaft speed signal invalid
P2748 Odd shaft speed signal missing
P0502 Output speed signal too low

These are related examples; the specific codes recorded on this project have not been confirmed. A code alone does not establish the cause. The sensor, wiring and related systems require diagnosis. Reference: Ferrari North America Technical Information 2389.

GTE rebuilt transmission with documentation

Inside the transmission.

The transmission was removed, opened and inspected. We replaced the affected electronics, addressed the oil leak and calibrated the internal systems, including the SAP and CCP platforms.

  • 01 Diagnostic investigation and fault analysis
  • 02 Transmission removal and internal inspection
  • 03 Electronic repairs and leak correction
  • 04 Bleeding and system calibration

A closer look at the work.

A selection of photographs from the workshop and the Ferrari FF.

Back on the road,
with confidence.

After the repair, bleeding and calibration, the FF had no further shifting issues, no error codes and no oil leak.

That is the value of understanding the complete system—from the first diagnostic clues to the final calibration.

Ferrari FF at the gas station after its transmission repair
THE FINISHED PROJECT   /   The Ferrari FF back on the road

Explore the next step.

Learn about our Getrag 7DCL750 rebuild service and the transmission systems involved, or send us a service request.

Transmission rebuild

Have a removed 7DCL750 transmission? View the rebuild options and select the service you need.

View Rebuild Service →

Send another component

Have another part you would like GTE to inspect or rebuild? Send us a service request before shipping it.

Request Service →

Learn about the 7DCL750

Explore the transmission, common concerns and our rebuild services in the 7DCL750 guide.

Read the Guide →

Bring your car to the workshop

Would you like our workshop to diagnose and service your vehicle? Request an appointment before bringing it in.

Request an Appointment →

Explore GTE Engineering projects

Browse more work from the GTE workshop.
View workshop projects →