Aston Martin V12 Vantage Clutch Rebuild – 4G43-11-11200
Aston Martin V12 Vantage Clutch Rebuild – 4G43-11-11200
SKU:53324516459489
Verfügbarkeit für Abholungen konnte nicht geladen werden
Specifications
Item Condition
Item Condition
Rebuild Service und Service provided
Part Number & Vendor
Part Number & Vendor
PN: 4G43-11-11200, 4G43-7540-AB - Vendor: PEGA Clutch
Warranty
Warranty
"Proposition 65 Warnings"
"Proposition 65 Warnings"
Product Details
Aston Martin V12 Vantage Clutch Rebuilding with PEGA Clutch®
GTE Engineering rebuilds customer-supplied Aston Martin V12 Vantage clutch assemblies with the selected PEGA Clutch® friction lining. Inspection establishes the original clutch condition and any additional work required.
Service format: Send-in clutch rebuild.
Application reference: 4G43-11-11200.
Available options: Stage 1, Stage 2, Stage 3, Stage 4. Select your lining above.
Separate work: Flywheel service, additional balancing, release-bearing / slave-cylinder work, hydraulics, installation and calibration require their own selection or written estimate.
What the Rebuild Includes
| Component or operation | Service scope |
|---|---|
| Disassembly and inspection | Cleaning and inspection for wear, heat damage and dimensional condition. |
| Friction lining | Installation of the selected PEGA friction material. |
| Serviceable clutch components | Reconditioning within the agreed scope. Replacement pressure plates, hubs, intermediate plates and hardware depend on condition and the estimate. |
| Assembly checks | Checks of release and engagement characteristics before shipment. Confirm the required balancing arrangement and any additional service. |
Available PEGA Stages
| Component or operation | Service scope |
|---|---|
| Stage 1 | PEGA FX4C-SC Organic |
| Stage 2 | PEGA Organic / BFXX Ceramic |
| Stage 3 | PEGA FXSS-SC Kevlar |
| Stage 4 | PEGA Kevlar / BFXX Ceramic |
The gallery stage chart illustrates the wider PEGA range. Only the selectable stages on this listing are offered here. Discuss vehicle use, modifications and the installed transmission with GTE before choosing.
Vehicle Application and Part Identification
Applicable V12 Vantage manual clutch assemblies. The V12 Vantage S uses a separately catalogued kit; do not select this service solely from the Vantage name.
4G43-11-11200 is an OEM replacement-kit reference; it replaces the earlier 4G43-7540-AB reference in applicable catalogs. An OEM kit can contain a flywheel, slave cylinder and fasteners. Those contents do not define the purchased rebuild scope.
Provide transmission type, installed clutch reference and photographs before ordering. The gallery shows Aston Martin clutch service examples; similar covers or shared photos do not prove that assemblies interchange. Flywheels or other components pictured are not included automatically.
How the Send-In Service Works
- Verify your part before shipping. Send identifying details through our quote request form.
- Select the lining and ship your core. Follow the shipping instructions and include order and contact details.
- Inspection and rebuilding. GTE confirms work outside the purchased scope before proceeding.
- Professional installation. Your installer completes the vehicle-specific fitting, adjustment and applicable calibration.
Technical Questions
Is this a new complete clutch kit?
This is a rebuild of your existing clutch. A new kit, replacement hard parts and additional services are included only when expressly specified in your order or estimate.
Does rebuilding fix every shifting fault?
Clutch wear, hydraulic-system faults, actuator problems and calibration issues need separate diagnosis. The service addresses the submitted clutch assembly.
What warranty applies?
See Warranty and Rebuild Coverage for applicable craftsmanship coverage, installation requirements and exclusions.
Specialist Support from GTE Engineering
Our in-house workshop supports clutch rebuilding and component identification for professional installers. Consult the Aston Martin clutch guide, PEGA stage information or contact GTE about your assembly.
Part selection responsibility: GTE Engineering does not provide VIN-to-part checks or fitment confirmations. The customer or sender is responsible for verifying part numbers, vehicle compatibility and the correct part before ordering or sending any component.
Do you have questions or comments about this part?
Please don’t hesitate to contact our team of experts,
we are happy to support.
Parts, Rebuilds & Installation — All In-House
Buying a rebuild? Need it installed or serviced? Our NJ workshop handles full installation, calibration, and complete clutch & transmission solutions.
Book a Service
