← Back to Workshop Projects

GTE Engineering / Workshop Projects

2012 Aston Martin V8 Vantage ASM & Clutch Rebuild

A 2012 Aston Martin V8 Vantage came in with no gear selection, intermittent starting, and an ASM hydraulic system that could not be bled.

2012 Aston Martin V8 Vantage transmission with rebuilt Sportshift ASM hydraulics fitted by GTE Engineering
Vehicle
2012 Aston Martin V8 Vantage
Transmission
Sportshift (ASM)
Work performed
Clutch and hydraulic rebuild
Completed
System function tested

01 / Diagnosis

No gear selection and intermittent starting

Aston Martin V8 Vantage underbody during transmission removal
Underbody access during transmission removal.

The car would sometimes start, but it would not select a gear. The ASM system also would not bleed, so we inspected both the clutch assembly and the hydraulic components.

02 / Removal

Removing the gearbox, torque tube and bellhousing

Removed Aston Martin torque tube and bellhousing assembly
Torque tube and bellhousing after removal.
Bellhousing close-up showing the clutch release bearing and green seal
Bellhousing and clutch release bearing close-up.

We removed the transmission and separated the bellhousing and shaft assembly to inspect the clutch.

Technical information

What the Sportshift checks found.

The car’s shifting and starting symptoms led us to inspect the clutch assembly and the ASM hydraulic components.

Area Finding
Gear selection The car would not select a gear.
Starting The car would sometimes fail to start.
Hydraulics The ASM hydraulic system could not be bled.
Power unit and actuator Several faulty electrovalves were found during teardown.

The work

03 / Clutch and flywheel

Clutch replacement and flywheel service

PEGA clutch disc with spring hub and friction lining
PEGA clutch disc and friction lining.
Close-up of the PEGA clutch disc and pressure plate
PEGA clutch disc and pressure plate detail.
PEGA pressure plate fitted to the Aston Martin clutch assembly
PEGA clutch assembly fitted in the car.

We fitted a PEGA clutch and serviced the flywheel before reassembly.

04 / ASM hydraulics

Power unit and actuator rebuild

GTE Engineering ASM hydraulic power unit and shift actuator
ASM hydraulic power unit and shift actuator.
Close-up of the ASM actuator mounted on the transmission
ASM actuator detail on the transmission.

We dismantled the ASM power unit and actuator and found several faulty electrovalves. We repaired the valve faults, rebuilt the hydraulic components, and bench tested the actuator.

05 / Final checks

Bleeding and function testing

Aston Martin transmission with the ASM actuator and hydraulic hardware fitted
Assembled transmission with ASM hydraulic hardware fitted.

After the clutch and hydraulic work, we bled the system using GTE hydraulic fluid and checked the operation of the rebuilt ASM system.

Workshop photos have been retouched for presentation.

← Back to Workshop Projects