Ferrari / 4RM PTU project
Ferrari FF & GTC4Lusso 4RM PTU Rebuild & Installation
A 4RM drive error led this Ferrari FF to GTE Engineering. We diagnosed internal PTU damage, rebuilt and reinstalled the unit, completed self-learning and road testing, and returned the car to its owner.

- Vehicle
- Ferrari FF
- System
- Front 4RM Power Transfer Unit
- Work performed
- PTU rebuild and installation
- Completed
- Passed all tests and delivered
01 / Diagnosis
Diagnosing the 4RM drive error.
The Ferrari FF arrived with a 4RM drive error. Our diagnostic assessment identified damage inside the front Power Transfer Unit (PTU), leading to removal and internal inspection before rebuilding.
The open housing and removed components shown here document the internal inspection stage.
Technical information
Addressing the internal leak concern.
Internal leakage is a recurring issue we encounter in Ferrari FF and GTC4Lusso V12 4RM PTUs. GTE uses a revised internal repair system designed to address this failure mode and reduce the risk of a similar malfunction recurring.
| Area | Finding |
|---|---|
| Customer concern | 4RM drive error. |
| Diagnostic finding | Internal damage to the front PTU. |
| Repair approach | PTU rebuild using GTE’s revised internal repair system. |
| Final verification | Self-learning completed; the car passed all tests and the road test. |
The work
02 / Rebuilding
Rebuilding the PTU with the revised repair system.
We rebuilt the PTU and incorporated our revised internal repair system to address the internal leakage concern. The work focused on the unit’s internal condition before reassembly and installation.
The component photographs show PTU internals and the associated hydraulic assembly. The photograph of two units in separate workshop bins provides additional workshop context.
03 / PERFORMANCE UPGRADE
GTE Engineering Power Bearings.
These are the burned main-load bearings removed during this rebuild. Their condition shows why replacement was necessary. GTE regularly encounters similar bearing damage in Ferrari FF and GTC4Lusso V12 4RM PTUs.
As part of the Performance-stage rebuild, we replace the bearings at these locations with GTE Engineering Power Bearings for higher load capacity. These are key components of the Performance upgrade, installed alongside the other internal upgrades and the revised internal leakage repair system.
04 / REASSEMBLY
The rebuilt unit, ready to return to the car.
With the rebuilding work complete, the PTU was reassembled for installation in the Ferrari FF. These views show the completed unit and its hydraulic lines, connections and wiring.
05 / INSTALLATION
Installing the PTU back into the Ferrari FF.
We installed the rebuilt PTU back into the vehicle, bringing the mechanical, hydraulic and electrical connections together before the self-learning procedure.
06 / SELF-LEARNING & ROAD TEST
Passed all tests and returned to the customer.
After installation, we completed the self-learning procedure and carried out a road test. The Ferrari FF passed all tests and was delivered back to our customer.
Workshop photos have been retouched for presentation.