← Back to Workshop Projects

Ferrari / 4RM PTU project

Ferrari FF & GTC4Lusso 4RM PTU Rebuild & Installation

A 4RM drive error led this Ferrari FF to GTE Engineering. We diagnosed internal PTU damage, rebuilt and reinstalled the unit, completed self-learning and road testing, and returned the car to its owner.

Ferrari FF on the GTE workshop lift with the PTU supported on the transmission table during installation.
Vehicle
Ferrari FF
System
Front 4RM Power Transfer Unit
Work performed
PTU rebuild and installation
Completed
Passed all tests and delivered

01 / Diagnosis

Diagnosing the 4RM drive error.

Open Ferrari FF PTU housing with bearings and a removed gearshaft during internal inspection.
PTU internal inspection: housing, bearings and removed gearshaft.

The Ferrari FF arrived with a 4RM drive error. Our diagnostic assessment identified damage inside the front Power Transfer Unit (PTU), leading to removal and internal inspection before rebuilding.

The open housing and removed components shown here document the internal inspection stage.

Technical information

Addressing the internal leak concern.

Internal leakage is a recurring issue we encounter in Ferrari FF and GTC4Lusso V12 4RM PTUs. GTE uses a revised internal repair system designed to address this failure mode and reduce the risk of a similar malfunction recurring.

Area Finding
Customer concern4RM drive error.
Diagnostic findingInternal damage to the front PTU.
Repair approachPTU rebuild using GTE’s revised internal repair system.
Final verificationSelf-learning completed; the car passed all tests and the road test.

The work

02 / Rebuilding

Rebuilding the PTU with the revised repair system.

Two Ferrari PTU assemblies with associated hoses and wiring in separate workshop bins, shown as component context.
Workshop reference: two PTU assemblies with associated hoses and wiring.
Ferrari PTU selector forks with shafts and locking pins shown during rebuilding.
PTU selector forks, shafts and locking pins.
Ferrari PTU hydraulic assembly, hoses and reservoir, shown with separate service-fluid containers.
Associated PTU hydraulic assembly and service-fluid containers.

We rebuilt the PTU and incorporated our revised internal repair system to address the internal leakage concern. The work focused on the unit’s internal condition before reassembly and installation.

The component photographs show PTU internals and the associated hydraulic assembly. The photograph of two units in separate workshop bins provides additional workshop context.

03 / PERFORMANCE UPGRADE

GTE Engineering Power Bearings.

Burned PTU main-load bearings — removed

Burned PTU main-load bearings removed and replaced with GTE Engineering Power Bearings. Damaged parts shown for comparison only, not for sale.
Damaged original main-load bearings, removed and replaced with GTE Engineering Power Bearings. Shown for comparison only — not for sale.

These are the burned main-load bearings removed during this rebuild. Their condition shows why replacement was necessary. GTE regularly encounters similar bearing damage in Ferrari FF and GTC4Lusso V12 4RM PTUs.

As part of the Performance-stage rebuild, we replace the bearings at these locations with GTE Engineering Power Bearings for higher load capacity. These are key components of the Performance upgrade, installed alongside the other internal upgrades and the revised internal leakage repair system.

04 / REASSEMBLY

The rebuilt unit, ready to return to the car.

Reassembled Ferrari FF PTU showing hydraulic block, lines and wiring.
Reassembled PTU: hydraulic-system side.
Reassembled Ferrari FF PTU showing the engine-side input coupling and mounting face.
Reassembled PTU: engine-side input coupling.

With the rebuilding work complete, the PTU was reassembled for installation in the Ferrari FF. These views show the completed unit and its hydraulic lines, connections and wiring.

05 / INSTALLATION

Installing the PTU back into the Ferrari FF.

Ferrari FF PTU beneath the vehicle during installation, showing hydraulic lines, wiring and protected connections.
The rebuilt PTU positioned beneath the Ferrari FF during installation.

We installed the rebuilt PTU back into the vehicle, bringing the mechanical, hydraulic and electrical connections together before the self-learning procedure.

06 / SELF-LEARNING & ROAD TEST

Passed all tests and returned to the customer.

Ferrari FF V12 engine bay in the GTE workshop during the 4RM PTU repair project.
Ferrari FF in the GTE workshop during the PTU repair.

After installation, we completed the self-learning procedure and carried out a road test. The Ferrari FF passed all tests and was delivered back to our customer.

Workshop photos have been retouched for presentation.

← Back to Workshop Projects